Item number: K2031B1
DC TIG WELDER + PLASMA CUTTER SET CT520 PD
The CT520
PD from Vector Welding® is a combination device
for welding and plasma cutting.
With 200A in TIG mode, 170A in MMA/electrode mode and plasma cutting with 40 A at 100V the device is well suited for installation, Repair, maintenance and DIY.
The
6,5kg light CT520 PD offers everything you need
for metal welding or
-cutting work
This article is a FULL EQUIPMENT SET consisting of welding device & Plasma cutter CT520PD, welding helmet, foot pedal, welding rods/tungsten electrodes and accessories!
CT520
PD FEATURES & ADVANTAGES:
3in1 multi-device: DC TIG, MMA/STICK, Plasma cut
DC-TIG Welding: Welding of almost all metals (not aluminium)
HF-ignition (TIG/CUT)
MMA/STICK: wrapped electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart is provided at each restart of the overcurrent by the welding unit and thus supports the ignition of the arc.
Arc-Force: Melted material goes more easily onto the workpiece. Prevents the The arc is extinguished if this material causes the contact between electrode and molten bath.
Anti-Stick: automatically switches off the welding generator when the electrode threatens to stick to the workpiece. It can be removed by hand, without Electrode clamp closed damage.
Plasma cutter a plasma jet generated by electricity melts the material and removes it with compressed air - a precise cut is created. With this method it is possible to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
cut thickness: max. 12mm (hand guided), quality cut max. 8mm (hand guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching electric currents
Overheating protection
CT520
PD FEATURES:
CT520
PD TECHNICAL DETAILS:
| adjustment range
welding current (TIG Mode) | 10-200 A |
| adjustment range
welding current (STICK Mode) | 10 -170 A |
| adjustment range
cutting current (CUT Mode) | 20 - 40 A |
| Duty cycle TIG 40°C | 200 A at 18 V 40% |
| Duty cycle STICK
40°C | 170 A at 26.8 V 25% |
| Plasma cutter
40°C | 40 A at 100 V 40% |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x B x H) | 425 x 152 x 291 |
| Weight in kg | 6,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity
(hand guided) | 12 mm |
| Quality cutting capacity
(hand guided) | 8 mm |
CT520
PD SYSTEM CONTROL:
| 1. Display | 4. Ampere | 7. 2 stroke/ 4 stroke mode |
| 2. Hotstart/Arc Force/ Anti-Stick | 5. On/Off | 8. Mode (TIG/Stick/CUT) |
| 3. Time (in seconds) | 6. Overheatimg Display | 9. Parameter settings |
| 1. Gas flow | 5. REM=Remote |
| 2. Starting current | 6. Current reduction |
| 3. Current rise | 7. Final Current |
| 4. welding current | 8. Gas follow-up |
CT520 PD TECHNICAL DETAILS:
| Welding current setting range (TIG
& nbsp; mode) | 10-200 A |
| Welding current setting range (MMA
/ STICK mode) | 10 -170 A |
| Welding current setting range (CUT
mode) | 20 - 40 A |
| duty cycle (ED) TIG 40 ° C
| 200 A at 18 V 40% |
| 170 A at 26.8 V 25% | |
| Duty cycle (ED) plasma cutter 40
° C | 40 A at 100 V 40% |
| Mains voltage | 1 x 230 volts |
| Mains frequency | 50 - 60 Hz |
| Degree of protection | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight in kg | 6.5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (Hand
guided) | 12 mm |
| Quality cutting capacity (hand
guided) | 8 mm |
CT520PD
SCOPE OF DELIVERY:
| CT520 PD welding machine + Cut |
| TIG torch SR-17, 4m |
| Plasma torch PT31, 4m (incl. 1x nozzle, 1x electrode, 1x ceramic cap) |
| Automatic welding helmet |
| foot pedal |
| 1kg TIG welding rods, stainless steel |
| 1kg TIG welding rods, steel |
| Pack of 10 tungsten electrodes |
| TIG wear parts (pack of 20) |
| Plasma wear parts (pack of 30) |
| Gas connection hose |
| Water separator with pressure gauge |
| Welding cable with electrode holder 200A, 3m |
| Earth cable, 3m |
This product consists of
Automatic welding helmet Wig Tig Mma Mig Mag welding mask | Flames design
DC TIG welder 200A with plasma cutter 40A, MMA electrode, HF ignition, IGBT | CT520PD
Tig Welding Filler Rods 1,6 mm Stainless Steel / TR 308 L SI
WIG-Schweißstäbe Stahl ER 70S-3 1,6mm
Tungsten electrodes WC 20 Grey 1,6 X175mm (10 Pcs)
