DC TIG welder 200A with plasma cutter 40A, MMA electrode, HF ignition, IGBT | CT520PD
Item number: K2031B
Article number: K2031B
WELDING EQUIPMENT + PLASMA CUTTER CT520 PD
The CT520
PD from Vector Welding is a combined device for welding and
plasma cutting.
with 200A in TIG mode, 170A in MMA/electrode mode and plasma cutting with 40 A at 100V the device is well suited for installation, repair, maintenance and DIY.
The
6.5kg light CT520 PD offers everything you need
for metal welding or cutting.
CT520
PD PROPERTIES & ADVANTAGES:
3in1 combi device: DC TIG, MMA/STICK, plasma cutting
TIG welding: welding of almost all metals
HF-ignition (TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.
Hot start: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc-Force: Melt off material is transferred to the workpiece more easily. Prevents the arc from going out if it is damaged by thisthis material causes contact between the electrode and the molten pool.
Anti-stick: automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT function with the help of a plasma beam generated by electricity. This beam melts the material and removes it with compressed air - a precise cut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
Cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
Overheating protection
CT520
PD FEATURES:
CT520
PD TECHNICAL DETAILS:
| setting range welding current (TIG
mode) | 10-200 A |
| setting range welding current
(MMA/STICK mode) | 10 -170 A |
| setting range welding current (CUT
mode) | 20 - 40 A |
| switch-on time (ED)
TIG 40°C | 200 A at 18 V 40% |
| switch-on time (ED) MMA/STICK
40°C | 170 A at 26.8 V 25% |
| switch-on time (ED) Plasma cutter
40°C | 40 A at 100 V 40% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight in kg | 6.5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting
capacity (manually guided) | 12 mm |
| Quality cutting capacity (manually
guided) | 8 mm |
CT520
PD CONTROLLER:
| 1. display display | 4. amperage/amperes | 7 cycle/ 4 cycle |
| 2. hotstart/Arc Force | 5. on/off | 8. mode (TIG/MMA/CUT) |
| 3. time/seconds | 6. superheat display | 9. parameter settings |
| 1. gas flow | 5. REM=Remote/Remote control lamp |
| 2. start current | 6. current reduction |
| 3. current rise | 7. end current |
| 4.
welding current | 8. gas after-run |
CT520 PD TECHNISCHE DETAILS:
| Einstellbereich Schweißstrom (WIG Modus) | 10-200 A |
| EInstellbereich Schweißstrom (MMA/STICK Modus) | 10 -170 A |
| Einstellbereich Schweißstrom (CUT Modus) | 20 - 40 A |
| Einschaltdauer (ED) WIG 40°C | 200 A bei 18 V 40% |
| Einschaltdauer (ED) MMA/STICK 40°C | 170 A bei 26.8 V 25% |
| Einschaltdauer (ED) Plasmaschneider 40°C | 40 A bei 100 V 40% |
| Netzspannung | 1 x 230 Volt |
| Netzfrequenz | 50 - 60 Hz |
| Schutzart | IP23S |
| Maße in mm (L x B x H) | 425 x 152 x 291 |
| Gewicht in kg | 6,5 |
| Normen | EN60974-1 / EC60974-1 |
| Maximale-Schnittkapazität (Hand geführt) | 12 mm |
| Qualitäts-Schnittkapazität (Hand geführt) | 8 mm |
CT520 PD Scope of delivery:
| CT520 DC TIG welder 200A with plasma cutter |
| TIG torch SR-17, 4m |
| WIG accessories package |
| Plasma torch PT31, 4m (incl. 1x nozzle, 1x electrode, 1x ceramic cap) |
| gas connection hose |
| Water cutter with manometer |
| welding cable with electrode holder 200A, 3m |
| ground cable, 3m |
