dc-wig-welder-with-plasmacutter-combi-cct520pd-vector-welding

dc-wig-welding-machine-with-plasma-cutter-combi-cct520pd-vector-welding_inverter

dc-wig-welding-device-with-plasma-cutter-combi-cct520pd-vector-welding_electrode

Welding machine SET: DC TIG with plasma cutter, welding helmet, pressure reducer, IGBT inverter | CT520PD

SKU: K2031BSET6
GTIN: 4251210410929
Category: TIG-CUT combi machine
Manufacturers: VECTOR WELDING

Welding machine SET: DC TIG with plasma cutter, welding helmet, pressure reducer, IGBT inverter | CT520PD

1 sold in last 8 hours

VECTOR WELDING welding machine with plasma cutter CT520 PD

DC TIG 10-200A

HF ignition

MMA/electrode 10-170A

Plasma cutting 20-40A

IGBT

COMPLETE SET: Welding machine & plasma cutter with helmet, welding rods & accessories, pressure reducer shielding gas argon/CO²

509,00 €

incl. 19% VAT , (Standard)

Available immediately
Delivery time: 2 - 3 Workdays in Germany

Item number: K2031B1

WELDING MACHINE + PLASMA CUTTER CT520 PD

The CT520 PD from Vector Welding is a combination device for welding and Plasma cutting.

With 200A in TIG mode, 170A in MMA/electrode mode and Plasma cutting with 40A at 100V, the device is well suited for installation, repair, maintenance and DIY work.

The 6.5 kg CT520 PD offers everything you need for metal welding or cutting work.

This item is a COMPLETE SET consisting of the CT520PD welding machine & Plasma cutter, welding helmet, welding rods/wolfram electrodes and accessories!

CT520 PD FEATURES & BENEFITS:

3in1 combination device: DC TIG, MMA/STICK, Plasma cutting
DC TIG welding: Welding of almost all metals
HF ignition (TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are arc carriers and filler metal in one.
Hotstart: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.
Arc-Force: Molten material transfers more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and the weld pool.
Anti-stick: automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT function using a plasma jet generated by electricity. This melts the material and removes it with compressed air, creating a precise cut. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.)
Cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection

CT520 PD FEATURES:

CT520 PD TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	20 - 40 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	40 A at 100 V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	6,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	12 mm
Quality cutting capacity (hand-guided)	8 mm

CT520 PD SYSTEM CONTROL:

1. display screen	4. current/ampere	7. 2 cycle/ 4 cycle
2. hot start/arc force	5. on/off	8. mode (TIG/MMA/CUT)
3. time/seconds	6. overheating display	9. parameter settings

1. gas advance	5. REM=Remote/Remote control light
2. start current	6. current reduction
3. current increase	7. final current
4. welding current	8. gas overrun

Shipping weight:	21,14 kg
Dimensions ( Length × Width × Height ):	52,00 × 56,00 × 42,00 cm

CT520PDTECHNICAL DETAILS:

Setting rangeWelding current (TIG)	10 -200 A
Welding current setting range (MMA/electrode)	10 -170 A
Setting range plasma cutter (CUT)	20 - 40A
Duty cycle (ED) TIG, 40°C, 10 min	200 A at 18V 40%
Duty cycle (ED) MMA,40°C, 10 min	170 A at 26.8V 25%
Duty cycle (ED) CUT, 40°C, 10 min	40 A at 100V 40%
Mains voltage	230V +/- 15%
Mains frequency	50 - 60 Hz
Effective input current	15,4A
Input current (max.)	30,9A
Required design of the single-phase generator	10 kVA
Protection class	IP23
Open circuit voltage (TIG/MMA)	60V DC
Open circuit voltage (CUT)	250V DC
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	6,5
Standards	EN 60974-1 / IEC 60974-1
Cooling	Fan cooled
Welding machine type	Inverter power source