DC TIG welder 200A with plasma cutter 50A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | Berlin 2400

BERLIN 2400 PROPERTIES & ADVANTAGES:

• 3in1 Combi-device: DC TIG, MMA/STICK, plasma cutting
  

• DC TIG welding: welding of almost all metals

• HF-ignition (TIG)
  

• pulse function: in pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
  

• MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.

• hot start: each time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc. 

• Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
  

• Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

• Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a pre- a precise cut is created. With this process all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)

• contact ignition (CUT)

• cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
  

• modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

• overheating protection

• 9 memory locations zfor individual setting of the welding parameters.

BERLIN 2400 FEATURES: