PRESSURE REDUCER
-
Bottle connection: W 21.0 x 1/14 "
-
The left display shows the filling quantity of the gas bottle
in cash
-
right display shows the flow rate in l / min
-
right controller (small) opens and
closes the flow (open right / left
close)
-
lower regulator (large) sets the flow rate
a (increase right / reduce left)
-
Tip: the average amount of shielding gas (argon 4.6)
for TIG welding in a calm room is 8-10
l / min
-
Tip: the rule of thumb applies to MIG / MAG welding
Wire diameter x 10 results in the optimal flow rate l / min
PROPERTIES
& ADVANTAGES:
| Application |
Argon, Co 2, protective gas, mixed gas |
| Bottle connection |
W 21.8 x 1/14 " |
| Hose & uuml; ll |
6-8mm |
| Material |
brass |
| Weight |
1095g |
| Dimensions |
approx. 18x18x6 cm |
| Flow rate |
0-30 l / min |
| max. Pressure bottle manometer |
315 bar |
| Shipping weight: |
1,50 kg
|
| Dimensions
( Length × Width × Height ):
|
21,50 × 20,50 × 8,00 cm |
PROPERTIES
& ADVANTAGES:
| Application |
Argon, Co 2, protective gas, mixed gas |
| Bottle connection |
W 21.8 x 1/14 " |
| Hose & uuml; ll |
6-8mm |
| Material |
brass |
| Weight |
1095g |
| Dimensions |
approx. 18x18x6 cm |
| Flow rate |
0-30 l / min |
| max. Pressure bottle manometer |
315 bar |
Scope of delivery pressure reducer
| 1x pressure reducer connection: W 21.0 x 1/14" |
