
article
number: M1057SIWM1
WELDING
DEVICE MILANO 2300
The light Milano2300
from Vector Welding is a MIG/MAG welding device
with 10-200A in MIG/MAG mode, 10-170A in MMA mode, as well as 10-200A
in TIG mode (optional).
The MIG/MAG
welding process with its automatic wire feed is
suitable for many welding applications, even when working in
hard-to-reach areas.
This article is a complete set consisting
of MIG/MAG welding device Milano 2300, welding helmet, 5kg wire roll
and accessory set.
MILANO
2300 EICHARACTERISTICS & ADVANTAGES:
- MIG/MAG: welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
-
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
-
inductance: The unit has a continuously adjustable choke.
This smoothes the welding current and changes the welding speedand
changes the rate of current rise to improve weld seam quality and
precision.
- 2
cycles/4 cycles (MIG/MAG and TIG)
-
MMA/STICK/E-HAND: coated electrodes are used - in this
process the electrodes are the arc carrier and filler metal in one.
- Hot start: each time
the welder is restarted, overcurrent is provided to assist ignition of
the arc.
-
Arc Force: Melted MaMelted material transfers more easily to
the workpiece. Prevents the arc from going out if this material causes
contact between the electrode and the molten pool.
- Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
- DC TIG Welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
- Lift Arc: Ignition occurs on contacton contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters./span>
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
- job memory: with the help of memory
locations, work sequences can be stored and thus reused at a later time.
- overheating protection
MILANO
2300 FEATURES:
MILANO
2300 TECHNICAL DETAILS:
adjustment range welding current
((MIG/MAG mode) | 10 - 200 A |
Welding current setting range
(MMA/STICK mode) | 10 - 170 A |
Welding current setting range (TIG
mode) | 10 - 200 A |
Duty cycle (ED) MIG/MAG 40°C | 200 A at 18V 40% |
Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8V 30% |
Duration of operation (ED) TIG
40°C | 200 A at 18V 40% |
Mains voltage | 1 x 230 Volt |
Mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 490 x 225 x 380 |
Weight in kg | 14 |
Standards | EN60974-1 / IEC60974-1 |
Wire diameter in mm | 0.6/0.8/1 |
MILANO
2300 CONTROLLER:

1. on/off | 4. display display ampere | 7. welding mode (MIG/MAG, TIG, MMA) |
2. superheat display | 5. display volt | 8. 2 cycle/ 4 cycle |
3. JOB and STORE | 6. parameter setting | 9. selection wire gauge |
MILANO 2300 TECHNICAL DETAILS:
setting range welding current (MIG/MAG mode) | 10 - 200 A |
setting range welding current (MMA/STICK mode) | 10 - 170 A |
setting range welding current (TIG mode) | 10 - 200 A |
duty cycle (ED) MIG/MAG 40°C | 200 A at 18V 40% |
duty cycle (ED) MMA/STICK 40°C | 170 A at 26, 8V 30% |
duty cycle (ED) TIG 40°C | 200 A at 18V 40% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 490 x 225 x 380 |
weight in kg | 14 |
standards | EN60974- 1 / IEC60974-1 |
wire diameter in mm | 0, 6/0.8/1 |
Milano 2300 Scope of delivery:
MIG/MAG welding machine Milano 2300 |
MIG/MAG torch: MB-15 (Euro central connection), 3m |
Automatic welding helmet |
5kg wire roll |
10x gas nozzles |
20x contact tips |
electrode pliers (9 mandrel), 3m |
ground clamp with ground cable (9 mandrel), 3m |
gas connection hose |