Welding equipment SET MIG MAG welding helmet, flux cored wire, accessories | MIG255A
Item number: M2255B1

Welding equipment SET MIG MAG welding helmet, flux cored wire, accessories | MIG255A

Item number: M2255B1
Available now!

Shipping time: 2 - 3 workdays

435,21 £

including 19% VAT., no shipping costs (Standard)

VECTOR WELDING MIG/MAG welding device MIG 255A

MIG/MAG 30-255A

2 cycle/ 4 cycle

MMA/electrode 30-170A

IGBT

suitable: wire coils 5kg (D200) & 15kg (D300)

COMPLETE SET: Welding device, welding helmet, 5kg flux-cored wire and accessories

 
Produktdetails anzeigen
Welding equipment Set MIG MAG 255A

Article number: M2255B1

WELDING EQUIPMENT SET MIG 255A

The MIG 255A from Vector Welding is a MIG/MAG welding equipment with 30-255A in MIG/MAG mode, 30-170A in MMA mode, and 10-200A in TIG mode (optional).

The MIG/MAGWelding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

This set is a fully-equipped consisting of MIG MAG welding device MIG 255A, welding helmet, 5kg welding wire (wire roll), as well as an extensive accessory set (see scope of delivery)

MIG 255A PROPERTIES & ADVANTAGES:

  • MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
  • In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
  • inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and / or precision is improved wi

  • 2 cycles/4 cycles (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.

  • hot start: every time the welding machine is restarted, overcurrent is provided and thus supports the ignition of the arc.

  • Arc Force: Melted material is transferred more easily to the workpieceover. Prevents the arc from being extinguished if contact between the electrode and the molten pool is caused by this material.

  • anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

  • DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: The ignition is triggered by contact with the welding cablethe workpiece, then the torch can be lifted and the welding process starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents

  • overheating protection

MIG 255A FEATURES:

Mig Mag 255a Funktionen

MIG 255A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)
30 - 255 A
Adjustment range welding current (MMA/STICK mode)
30 - 170 A
Adjustment range welding current (TIG mode)
10 - 200 A
Duty cycle (ED) MIG/MAG 40°C
255 A at 25V 35%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8V 35%
Duty cycle (ED) TIG 40°C
200 A at 18V 35%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
493 x 222 x 375
Weight in kg
11.5
Standards
EN60974-1 / IEC60974-1
wire diameter in mm
0.6/0.8/1

MIG 255A CONTROLLER:

Control Panel MIG 225A

1. On/Off
4. SWelding mode
7. 2 cycle/ 4 cycle
2. superheat display
5. display display display
8. selection of wire thickness
3. parameter setting
6. ampere/inductance/burn-back/volt

MIG 255A TECHNICAL DETAILS:

setting range welding current (MIG/MAG  mode)
30 - 255 A
setting range welding current (MMA/STICK mode)
30 - 170 A
setting range welding current (TIG mode)
10 - 200 A
duty cycle (ED) MIG/MAG 40°C
255 A at 25V 35%
duty cycle (ED) MMA/STICK 40°C
170 A at 26, 8V 35%
switch-on time (ED) TIG 40°C
200 A at 18V 35%
mains voltage
1 x 230 Volt
mains frequency
50 - 60 Hz
protection class
IP23
Dimensions in mm (L x W x H)
493 x 222 x 375
weight in kg
11, 5
standards
EN60974-1 / IEC60974-1
wire diameter in mm
0, 6/0.8/1

MIG 255 SET Scope of delivery:

MIG/MAG welding machine MIG 255
MIG/MAG torch: MB-15 (Euro central connection), 3m
Automatic welding helmet
MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm)
MIG/MAG cored wire steel (copper plated) ER70S 0,8mm - 5kg (D200 roll)
electrode pliers (13 mandrel), 3m
ground clamp with ground cable (13 mandrel), 3m
gas connection hose

This product consists of

related products