
Article
number: M1057SIWM
WELDING
DEVICE MILANO 2300
The Milano 2300 from Vector Welding is a MIG/MAG
welding machine with 10-200A in MIG/MAG mode, 10-170A in MMA
mode, as well as 10-200A in TIG mode (optional).
The
MIG/MAG welding process with its automatic wire feed
is suitable for many welding applications, even when working in
hard-to-reach areas.
MILANO
2300 PROPERTIES & ADVANTAGES:
-
MIG/MAG: Welding with automatic wire feed.
When
MIG welding argon (more rarely helium) is used as the shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as the shielding gas and is mainly used for simple and low-alloy steel such as mild steel. -
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
-
Inductance: The device has a continuously adjustable choke.
This smoothes the welding current and changes the rate of current rise
to improve the weld seam quality and precision.
- 2
cycles/4 cycles (MIG/MAG and TIG)
- MMA/STICK/E-HAND:
coated electrodes are used - in this process, the electrodes are the
arc carrier and filler metal in a.
-
hot start: each time the welding unit is restarted,
overcurrent is provided to support the ignition of the arc.
-
Arc Force: Melted material transfers to the workpiece more
easily. Prevents the arc from going out if this material causes contact
between the electrode and the molten pool.
- Anti-Stick automatically switches off the welding generator if the electrode is not in contact with the molten poolElectrode is stuck to the workpiece and must be removed by hand without damaging the electrode clamp.
- DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
- Lift Arc: Ignition occurs on contact with the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.span>
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical SCurrents
- Job memory: With the help of memory
locations, workflows can be saved and used again at a later time.
- overheating protection
MILANO
2300 FEATURES:
MILANO
2300 TECHNICAL DETAILS:
Welding current setting range
(MIG/MAG mode) SPL | 30 - 200 A |
Welding current setting range
(MIG/MAG mode) 0.6 wire | 25-110 A |
Welding current setting range
(MIG/MAG mode) 0.8 wire | 35-180 A |
Welding current setting range
(MIG/MAG mode) 1.0 wire | 50-200 A |
Welding current setting range
(MMA/STICK mode) | 10 - 170 A |
Welding current setting range (TIG
mode) | 10 - 200 A |
Welding current duty cycle (ED)
MIG/MAG 40°C | 200 A at 18V 40% |
Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8V 30% |
Duty cycle (ED) TIG 40°C | 200 A at 18V 40% |
Mains voltage | 1 x 230 Volt |
Mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 490 xx 225 x 380 |
weight in kg | 14 |
standards | EN60974-1 / IEC60974-1 |
wire diameter in mm | 0.6/0.8/1 |
MILANO
2300 CONTROL SYSTEM:

1. on/off | 4. display Ampere | 7. welding mode (MIG/MAG, TIG, MMA) |
2. superheat display | 5. display Volt | 8. 2 cycle/ 4 cycle |
3. JOB and SAVE | 6. parameter setting | 9. selection wire gaugeSelection
wire thickness |
MILANO
2300 TECHNICAL DETAILS:
Welding current setting range
(MIG/MAG mode) SPL | 30 - 200 A |
Welding current setting range
(MIG/MAG mode) 0.6 wire | 25-110 A |
Welding current setting range
(MIG/MAG mode) 0.8 wire | 35-180 A |
Welding current setting range
(MIG/MAG mode) 1.0 wire | 50-200 A |
Welding current setting range
(MMA/STICK mode) | 10 - 170 A |
Welding current setting range (TIG
mode) | 10 - 200 A |
Welding current duty cycle (ED)
MIG/MAG 40°C | 200 A at 18V 40% |
Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8V 30% |
Duty cycle (ED) TIG 40°C | 200 A at 18V 40% |
Mains voltage | 1 x 230 Volt |
Mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 490 xx 225 x 380 |
weight in kg | 14 |
standards | EN60974-1 / IEC60974-1 |
wire diameter in mm | 0.6/0.8/1 |
Milano 2300 Scope of delivery:
MIG/MAG welding machine Milano 2300 |
MIG/MAG torch: MB-15 (Euro central connection), 3m |
electrode pliers (9 mandrel), 3m |
ground clamp with ground cable (9 mandrel), 3m |
gas connection hose |