Article
number: M2295B1
Welding device MIG 295A
The MIG 295A from Vector Welding is a MIG/MAG
welding device with 30-295A in MIG/MAG mode, 30-250A in MMA
mode, as well as 10-280A in TIG mode (optional).
The
MIG/MAG welding process with its automatic wire feed is
suitable for many welding applications, even when working in
hard-to-reach places.
This set is a fully-equipped consisting of MIG MAG welding device MIG 295A, welding helmet, 5kg welding wire (wire roll), as well as an extensive accessory set (see scope of delivery)
MIG
295A PROPERTIES & ADVANTAGES:
MIG/MAG: welding with automatic wire feed. In MIG welding argon (rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for welding of non-ferrous metals and stainless steeland is mainly used for simple and low-alloy steel such as construction steel.
-
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and precision is improved.
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart: Each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material is transferred to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clampto be damaged.
DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: The ignition takes place on contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
Overheating protection
MIG
295A FEATURES:
MIG
295A TECHNICAL DETAILS:
| Welding current setting range
(MIG/MAG mode) | 30 - 295 A |
| Welding current setting range
(MMA/STICK mode) | 30 - 2500 A |
| Welding current setting range (TIG
mode) | 10 - 280 A |
| Duty cycle (ED) MIG/MAG 40°C | 295 A at 28.8V 60% |
| Duty cycle (E(ED) MMA/STICK
40°C | 250 A at 30V 60% |
| Cycle time (ED) TIG 40°C | 280 A at 21.2V 60% |
| Mains voltage | 400 Volt/3 phases |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 493 x 222 x 375 |
| Weight in kg | 13 |
| Standards | EN60974-1 / IEC60974-1 |
| Wire diameter in mm | 0.6/0.8/1 |
MIG
295A CONTROLLER:
| 1. on/off | 4. welding mode | 7. 2 cycle/ 4 cycle |
| 2. superheat display | 5. display display display | 8. selection wire gauge |
| 3. parameter setting | 6. ampere/inductivity/burn-back/volt |
|
MIG 295A TECHNICAL DETAILS:
| setting range welding current (MIG/MAG mode) | 30 - 295 A |
| setting range welding current (MMA/STICK mode) | 30 - 2500 A |
| setting range welding current (TIG mode) | 10 - 280 A |
| duty cycle (ED) MIG/MAG 40°C | 295 A at 28, 8V 60% |
| duty cycle (ED) MMA/STICK 40°C | 250 A at 30V 60% |
| duty cycle (ED) TIG 40°C | 280 A at 21, 2V 60% |
| mains voltage | 400 Volt/3 phases |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 493 x 222 x 375 |
| weight in kg | 13 |
| standards | EN60974- 1 / IEC60974-1 |
| wire diameter in mm | 0, 6/0.8/1 |
Welding Equipment SET MIG 295
| MIG/MAG welding machine MIG 295 |
| MIG/MAG torch: MB-24 (Euro central connection), 3m |
| Automatic welding helmet |
| MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm) |
| MIG/MAG cored wire steel (copper plated) ER70S 0,8mm - 5kg (D200 roll) |
| electrode pliers (9 mandrel), 3m |
| ground clamp with ground cable (9 mandrel), 3m |
| gas connection hose |
This product consists of
Automatic welding helmet Wig Tig Mma Mig Mag welding mask | Flames design
MIG MAG welder 295A, MMA electrode 250A, 400V, IGBT, for 5kg/15kg wire reel | MIG295A
