Article
number: M2295B
Welding device MIG 295A
The
lightweight MIG 295A from Vector Welding is a MIG/MAG
welding device with 30-295A in MIG/MAG mode, 30-250A in MMA
mode, as well as 10-280A in TIG mode (optional).
The
MIG/MAG welding process with its automatic wire feedis
suitable for many welding applications, even when working in
hard-to-reach places.
MIG
295A PROPERTIES & ADVANTAGES:
-
MIG/MAG: welding with automatic wire feed. In MIG welding argon (rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for welding of non-ferrous metals and stainless steeland is mainly used for simple and low-alloy steel such as construction steel.
-
inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and precision is improved.
-
2 cycles/4 cycles (MIG/MAG and TIG)
-
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
-
Hotstart: Each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
-
Arc Force: Melted material is transferred to the workpiece more easily. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
-
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clampto be damaged.
-
DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
-
Lift Arc: The ignition takes place on contact with the workpiece, then the torch can be lifted and welding process starts with the selected parameters.
-
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
-
Overheating protection
MIG
295A FEATURES:
MIG
295A TECHNICAL DETAILS:
| Welding current setting range
(MIG/MAG mode) |
30 - 295 A |
| Welding current setting range
(MMA/STICK mode) |
30 - 2500 A |
| Welding current setting range (TIG
mode) |
10 - 280 A |
| Duty cycle (ED) MIG/MAG 40°C |
295 A at 28.8V 60% |
| Duty cycle (E(ED) MMA/STICK
40°C |
250 A at 30V 60% |
| Cycle time (ED) TIG 40°C |
280 A at 21.2V 60% |
| Mains voltage |
400 Volt/3 phases |
| Mains frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm (L x W x H) |
493 x 222 x 375 |
| Weight in kg |
13 |
| Standards |
EN60974-1 / IEC60974-1 |
| Wire diameter in mm |
0.6/0.8/1 |
MIG
295A CONTROLLER:
| 1. on/off |
4. welding mode |
7. 2 cycle/ 4 cycle |
| 2. superheat display |
5. display display display |
8. selection wire gauge |
| 3. parameter setting |
6. ampere/inductivity/burn-back/volt |
|
MIG 295A TECHNICAL DETAILS:
| setting range welding current (MIG/MAG mode) |
30 - 295 A |
| setting range welding current (MMA/STICK mode) |
30 - 2500 A |
| setting range welding current (TIG mode) |
10 - 280 A |
| duty cycle (ED) MIG/MAG 40°C |
295 A at 28, 8V 60% |
| duty cycle (ED) MMA/STICK 40°C |
250 A at 30V 60% |
| duty cycle (ED) TIG 40°C |
280 A at 21, 2V 60% |
| mains voltage |
400 Volt/3 phases |
| mains frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm (L x W x H) |
493 x 222 x 375 |
| weight in kg |
13 |
| standards |
EN60974- 1 / IEC60974-1 |
| wire diameter in mm |
0, 6/0.8/1 |
