>
FOOT PEDAL
REMOTE CONTROL
-
Remote control for VECTOR WELDING devices
-
offers the possibility of the welding current
Easy to adjust during welding
-
stepping on the foot pedal leads
About a
built-in switch for ignition
-
You can use the inclination of your feet
the
Set the welding current
PROPERTIES
& ADVANTAGES:
-
Foot pedal
Remote control for TIG Welding machines with
5-pin female Plug (please pay attention to the plug of your device)
-
Cable length 1.5m
-
scheme
Via remote control in 2-step mode (for devices with
automatic switchover to foot pedal operation is the
Set the welding current on the device to 000 (zero).
-
on
Step potentiometer (1-10), the control range can be set from 0
to make finer adjustments in the lower area
can
-
compatible
with VECTOR WELDING TIG Welding machines (ATTENTION: only the devices that have a 5 pin male connector installed): London 2400, New York 2500, Tokyo 2300, WIG DC 200D
-
5 pol. (female) connector included.
Scope of delivery foot pedal remote control
| 1x foot pedal remote control |
| 1x 5 pin plug |
| Cable 1,5m |
