item number:
ZO3410
FOOT PEDAL
REMOTE CONTROL
Remote control for VECTOR WELDING devices
offers the possibility of the welding current Easy to adjust during welding
stepping on the foot pedal leads About a built-in switch for ignition
You can use the inclination of your feet the Set the welding current
PROPERTIES
& ADVANTAGES:
Foot pedal Remote control for TIG welding machines with 5-pin Plug (please pay attention to the plug of your device)
Cable length 1.5m
scheme Via remote control in 2-step mode (for devices with automatic switchover to foot pedal operation is the Set the welding current on the device to 000 (zero).
on Step potentiometer (1-10), the control range can be set from 0 to make finer adjustments in the lower area can
compatible with VECTOR WELDING TIG welding machines
5 pol. (male) connector included. 7 pol./ 2 pol. plug available
Lieferumfang Fußpedal Fernsteuerung
| 1x Fußpedal Fernsteuerung |
| 1x 5 pol. Stecker |
| Kabel 1,5m |
