Item number: C1051SIWM
PLASMA CUTTER PARIS 700
The Paris 700 from Vector Welding is a plasma cutter with high frequency contactless ignition. The unit is a strong and reliable partner in the fields of installation, repair, maintenance and DIY.
The cutting current is continuously adjustable from 20-70A. The Paris 700 achieves a maximum cut thickness of 24mm and average quality cuts up to 15mm.
Paris 700 PROPERTIES & ADVANTAGES:
-
Plasma cutter:a plasma jet generated by electricity melts the material and carries it away with compressed air - a precisecut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.).
-
High-frequency ignition, contactless: first-class ignition behavior, without the need for contact with the workpiece
-
Cut thicknessSteel: maximum 24mm (hand guided), quality cut average up to 15mm(hand guided).
-
Cutting thicknessAluminum: maximum 17mm(hand guided), quality cut average up to11mm(hand guided).
-
Cutting current continuously adjustable from 20-70A
-
modernIGBT (InsulatedGate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
-
overheating protection
Paris 700 FEATURES:
Paris 700 TECHNICAL DETAILS:
| Setting range cutting current |
20-70A |
| Duty cycle (ED) Plasma cutter 40°C |
70A at 108V 60% |
| Mains voltage |
400V/3 phases |
| Mains frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm (L x W x H) |
380 x 160 x 365 |
| Weight in kg |
12 |
| Standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity (hand guided) |
24 mm |
| Quality cutting capacity (hand guided) |
15 mm |
Paris 700 SYSTEM CONTROL:
| 1. indicator display |
3. overheating indicator |
| 2. operation indicator |
4. adjustment wheel |
| Shipping weight: | 14,60 kg |
| Dimensions ( Length × Width × Height ): | 79,00 × 60,00 × 40,00 cm |
Paris 700 TECHNICAL DETAILS:
| setting range cutting current |
20-70A |
| switch-on time (ED) Plasma cutter 40°C |
70A at 108V 60% |
| mains voltage |
400V/3 phases |
| mains frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm (L x W x H) |
380 x 160 x 365 |
| weight in kg |
12 |
| standards |
EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) |
24 mm |
| Quality Cutting capacity (manually guided) |
15 mm |
- Plasma cutter
- Plasma torch: AG-60 (gas thread power connection M16x1,5, 2 pole), 4m
- Welding gloves
- Automatic welding helmet
- Ground tongs (9 mandrel), 3m cable
- Gas connection hose
- Water separator
- Plasma wear parts-SET 30 pieces
