
Item number C1052VD
PLASMA CUTTER C101
The C101 from Vector Welding is a plasma cutter with contactless ignition. The device is a strong and reliable partner in the areas of installation, repair, maintenance and DIY.
The cutting current is infinitely adjustable from 20-100A. The C101 achieves a maximum cutting thickness of 50 mm and average quality cuts up to 35mm.
C101 FEATURES & Benefits:
-
Plasma cutter: A plasma beam generated by electricity melts the material and it drains with compressed air - a precise Cut is created. This procedure can be used to Metal cutting (e.g. steel, stainless steel, aluminium, copper, etc.)
-
Contactless Ignition: erstklassiges ignition behaviour without contact to the workpiece
-
Cutting thickness Steel: maximum 50mm (hand guided), quality cut average up to 35mm (Hand guided).
-
Cutting thickness Aluminum: maximum 35mm (hand-guided), quality cut average to 25mm (hand guided).
-
Cutting current infinitely variable adjustable by 20-100A
-
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
-
Overheat protection
C101 FEATURES:
C101 TECHNICAL DETAILS:
Setting range cutting current |
20-100A |
Switch-on time (ED) Plasma cutter 40°C |
100A at 120V 60% |
Voltage |
400V/3 Phasen |
Frequency |
50 - 60 Hz |
Protection |
IP23S |
Dimensions in mm (L x W x H) |
540 x 270 x 450 |
Weight in kg |
23 |
Standards |
EN60974-1 / EC60974-1 |
Maximum cutting capacity (hand-guided) |
50 mm |
Quality cutting capacity (hand-guided) |
35 mm |
C101 SYSTEM CONTROL:

1. Air pressure indicator/barometer |
5. Fault indicator |
9. Selection of cutting function |
2. Display |
6. Power |
10. "+" Button |
3. On/Off |
7. Grid cut |
11. "-" Button |
4. Overheating indicator |
8. Normal cut |
Shipping weight: | 34,00 kg |
C101 TECHNICAL DETAILS:
adjustment range cutting current |
20-100A |
Duty cycle (ED) Plasma Cutter 40°C |
100A at 120V 60% |
mains voltage |
400V/3 phases |
mains frequency |
50 - 60 Hz |
Protection class |
IP23S |
Dimensions in mm (L x W x H) |
540 x 270 x 450 |
weight in kg |
23 |
standards |
EN60974- 1 / EC60974-1 |
Maximum cutting capacity (manually guided) |
50 mm |
Quality Cutting capacity (manually guided) |
35 mm |
C101 Scope of delivery:
Plasma cutter C101 |
Plasma torch: PT 100, Euro central connection, 6m |
Ground tongs with ground cable (13 mandrel), 3m |
Gas connection hose |