Plasma cutter 70A, IGBT, pilot ignition (contactless), cutting 30MM | C71

Special Offer: Only the unit is included; no accessories: C71 Plasma Cutter

Plasma Cutter 20-70A

Contactless ignition

Steel cutting thickness up to 30 mm

Aluminum cutting thickness up to 20 mm

1.599,00 €

incl. 19% VAT , (Standard)

Manufacturers recommended retail price: 2.099,00 €

(Save 23.82%, i.e. 500,00 €)

pcs.

Special Offer: Only the unit is included; no accessories: C71 Plasma Cutter

C71 PLASMA CUTTER

Plasma cutter: An electric plasma jet melts the material and blows it away with compressed air—resulting in a precise cut. This process can be used to cut all conductive metals (e.g., steel, stainless steel, aluminum, copper, etc.).
Steel cutting thickness: maximum 30 mm (hand-guided), quality cut averaging up to 20 mm (hand-guided).
Aluminum cutting thickness: maximum 20 mm (hand-guided), high-quality cut averaging up to 15 mm (hand-guided).
Cutting current continuously adjustable from 20–70 A
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
Overheating protection

Cutting current range	20–70 A
Duty Cycle (DC) for 40°C Plasma Cutter	70 A at 108 V, 60%
Mains voltage	400 V / 3-phase
Mains frequency	50–60 Hz
Protection class	IP23S
Dimensions in mm	520 x 230 x 380
Weight in kg	18
Standards	EN 60974-1 / EC 60974-1
Maximum cutting capacity (hand-held)	30 mm
Quality cutting capacity (hand-held)	20 mm

Shipping weight:	26,00 kg
Dimensions ( Length × Width × Height ):	52,00 × 23,00 × 38,00 cm

Cutting current setting range	20-70A
Duty cycle (ED) plasma cutter 40°C	70A at 108V 60%
Mains voltage	400V/3 phases
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm	520 x 230 x 380
Weight in kg	18
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	30 mm
Quality cutting capacity (hand-guided)	20 mm

Special Offer: No accessories included; only the unit is supplied

C71 Plasma Cutter