AC/DC TIG welding machine TIG 204 Pro
/DC TIG 204 Pro offers a precise, professional AC/DC TIG
welding process. It is a precise welding specialist that fits
all welding materials (including aluminum).
operation and full functions: All necessary controls for AC and DC TIG
welding (AC/DC) with HF or contact ignition (Lift
Arc) can be quickly set via the control panel. TIG
welding with 200A and MMA/electrode
welding also with 200A.
TIG 204 Pro welding unit has 9 memory channels,
set welding parameters can be stored and used again for a new workpiece.
TIG 204 Pro
FEATURES & ADVANTAGES:
- AC/DC TIG: welding of all weldable metals
- The adjustable AC output frequency
allows the operator to focus the arc to minimize the heat affected
- The advanced AC balance control helps
to maintain a sharp tungsten needle to precisely control the arc in the
Lift-Arc-Start: Enables AC or DC arc
starting without high frequency.
Pulse function: during pulse welding,
the welding current alternates between output and peak current at the
desired frequency. The longer the intervals, the less energy and heat
is supplied to the workpiece
- Continuous output control: Focus the arc for different
material thicknesses. Strong for heavy duty: 200A at 50% (TIG
Trigger Control: 4T/2T
MMA/electrodes/stick: coated electrodes
are used - in this process the electrodes are arc carrier and filler
metal in one.
Hotstart: every time the
welding unit is restarted, overcurrent is provided and thus supports
the ignition of the arc.
- Arc-Force: Melted material is
transferred more easily to the workpiece. Prevents the arc from
extinguishing if this material causes contact between electrode and
Anti-Stick: automatically switches off
the welding generator if the electrode sticks to the workpiece and must
be removed by hand without damaging the electrode clamp
- 10 memory locations for individual
setting of the welding parameters.
TIG 204 Pro
|Welding Current/Voltage Range
|Duty cycle TIG
|200 A at 18V 50%
|Duty cycle MMA
|200 A at 28V 50%
|1 x 230 Volt
|50 - 60 Hz
|Dimensions in mm (L x W x H)
|252 x 260 x 445 mm
|EN 60974-1 / IEC 60974-1
|Inverter power source