Item number: T1012VD
AC/DC WIG V1841 WELDING MACHINE
The AC/DC V1841 is a precise aluminium welding specialist suitable for all materials to be welded. Simple and versatile operation characterises the welding machine.
The set welding parameters for your project can be stored in the
9 available memory locations and recalled at a later date.
V241 FEATURES & ADVANTAGES:
-
AC/DC TIG: welding of all weldable metals including aluminium
-
The adjustable AC output frequency allows the operator to focus the arc to minimize the heat affected zone.
-
The advanced AC balance control helps to maintain a sharp tungsten needle to precisely control the arc in the weld joint.
-
Lift-Arc-Start: Enables AC or DC arc starting without high frequency.
-
Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
-
Continuous output control: Focus the arc for different material thicknesses. Strong for heavy duty: 185A at 35% (TIG).
-
Trigger Control: 4T/2T
-
MMA/electrodes/stick: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
-
Hotstart: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
-
Arc-Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between electrode and molten pool.
-
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp
-
9 memory locations for individual setting of the welding parameters.
V1841 FEATURES:
V1841 TECHNICAL DETAILS:
| adjustment range welding current
(TIG) |
10-180 A |
| adjustment range welding current
(MMA) |
10-170 A |
| switch-on time (ED) TIG 20°C |
180 A at 17.2V 35% |
| duty cycle (ED) MMA 20°C |
170 A at 26.8V 35% |
| mains voltage |
1 x 230 Volt |
| mains frequency |
50 - 60 Hz |
| protection class |
IP23 |
| dimensions in mm (L x W x H) |
395 x 180 x 375 |
| weight in kg |
10,6 |
| standards |
IE60974-1, -3, -10 CL.A |
V1841 SYSTEM CONTROL:
| 1. Display |
6. AC/DC - Modes Button |
11. "+" Button |
||
| 2. Power-on indicator |
7. 2T/4T Trigger |
12. "-" Button |
||
| 3. Overheating indicator |
8. Welding mode (MMA/WIG) |
13. Parameter selection |
||
| 4. Hot Start/Arcforce |
9. PULS - Function |
|||
| 5. JOB and SAVE |
10. Setting of welding parameters |
|||
V1841 SETTING DETAILS:
| 1. Gasflow |
6. Pulse intensity (%) |
11. AC frequency |
||
| 2. Load power capacity |
7. Pulse frequency (Hz) |
12. Electricity shifting |
||
| 3. Electricity increase |
8. current reduction |
|||
| 4. Primary current |
9. Closing current |
|||
| 5. Secondary current |
10. Gas after-run |
|||
| Shipping weight: | 17,30 kg |
| Item weight: | 16,00 kg |
| Dimensions ( Length × Width × Height ): | 47,00 × 30,00 × 49,00 cm |
V1841 TECHNICAL DETAILS:
| Adjustment range welding current (TIG) |
10-180 A |
| Adjustment range welding current (MMA) |
10-170 A |
| Duty cycle TIG 20°C |
180 A at 17.2V 35% |
| Duty cycle (ED) MMA 20°C |
170 A at 26.8V 35% |
| Input Voltage |
1 x 230 Volt |
| Power frequency |
50 - 60 Hz |
| Protection class |
IP23 |
| Dimensions in mm (L x W x H) |
395 x 180 x 375 |
| Weight (kg) |
10,6 |
| Standards |
IE60974-1, -3, -10 CL.A |
V1841 Scope of delivery:
| AC/DC TIG welder V1841 |
| TIG torch: WP-26 (13 mandrel), 4m, gas quick-acting closure |
| TIG- Set, 14 pieces |
| Electrocodile Electrode Holder 200A (13 mandrel), 3m |
| Crocodile Earth Clamp with earth cable 200A (13 mandrel), 3m |
| gas connection hose |
