
Item number C1052VD
PLASMA CUTTER C101
The C101 from Vector Welding is a plasma cutter with contactless ignition. The device is a strong and reliable partner in the areas of installation, repair, maintenance and DIY.
The cutting current is infinitely adjustable from 20-100A. The C101 achieves a maximum cutting thickness of 50 mm and average quality cuts up to 35mm.
C101 FEATURES & Benefits:
Plasma cutter: A plasma beam generated by electricity melts the material and it drains with compressed air - a precise Cut is created. This procedure can be used to Metal cutting (e.g. steel, stainless steel, aluminium, copper, etc.)
Contactless Ignition: erstklassiges ignition behaviour without contact to the workpiece
Cutting thickness Steel: maximum 50mm (hand guided), quality cut average up to 35mm (Hand guided).
Cutting thickness Aluminum: maximum 35mm (hand-guided), quality cut average to 25mm (hand guided).
Cutting current infinitely variable adjustable by 20-100A
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
Overheat protection
C101 FEATURES:
C101 TECHNICAL DETAILS:
Setting range cutting current | 20-100A |
Switch-on time (ED) Plasma cutter 40°C | 100A at 120V 60% |
Voltage | 400V/3 Phasen |
Frequency | 50 - 60 Hz |
Protection | IP23S |
Dimensions in mm (L x W x H) | 540 x 270 x 450 |
Weight in kg | 23 |
Standards | EN60974-1 / EC60974-1 |
Maximum cutting capacity (hand-guided) | 50 mm |
Quality cutting capacity (hand-guided) | 35 mm |
C101 SYSTEM CONTROL:

1. Air pressure indicator/barometer | 5. Fault indicator | 9. Selection of cutting function |
2. Display | 6. Power | 10. "+" Button |
3. On/Off | 7. Grid cut | 11. "-" Button |
4. Overheating indicator | 8. Normal cut |
C101 TECHNISCHE DETAILS:
Einstellbereich Schneidstrom | 20-100A |
Einschaltdauer (ED) Plasmaschneider 40°C | 100A bei 120V 60% |
Netzspannung | 400V/3 Phasen |
Netzfrequenz | 50 - 60 Hz |
Schutzart | IP23S |
Maße in mm (L x B x H) | 540 x 270 x 450 |
Gewicht in kg | 23 |
Normen | EN60974-1 / EC60974-1 |
Maximale-Schnittkapazität (Hand geführt) | 50 mm |
Qualitäts-Schnittkapazität (Hand geführt) | 35 mm |
C101 Lieferumfang:
Plasmaschneider C101 |
Plasma-Brenner: PT 100, Eurozentralanschluss, 6m |
Massezange mit Massekabel (13 Dorn), 3m |
Gasverbindungsschlauch |