Description
Item number:C1053SIWM
PLASMA CUTTER PARIS 500
The Paris 500 from Vector Welding is a plasma cutter with contact ignition. Its light weight of 7 kg makes it a handy and reliable partner in the fields of installation, repair, maintenance and DIY.
The cutting current is continuously adjustable from 20-50A. The plasma cutter convinces with a good cutting quality and high cutting speed. The Paris500 achieves a maximum cut thickness of 18mm and average quality cuts up to 12mm.
Paris500 PROPERTIES & ADVANTAGES:
- Plasma cutter: a plasma jet generated by electricity melts the material and carries it away withcompressed air, a precise cut is obtained. This method can cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.).
- Contact ignition: first-class ignition behavior, ignition takes place when brushing over the workpiece
- Steel cutting thickness: maximum up to 18mm (hand-held). Quality cut 14 mm (hand-guided).
- Cut thickness aluminum:maximum up to 12mm (hand guided). Quality cut 8mm(hand guided)
- Cutting current infinitely variable from 20-50A
- modern IGBT (InsulatedGate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
- Overheating protection
Paris500 FEATURES:
Paris500 TECHNICAL DETAILS:
| Setting range cutting current | 20 - 50 A |
| Duty cycle (ED) plasma cutter40°C | 50A at 100V 30% |
| Mains voltage | 1x230V |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 380 x 160 x 320 |
| Weight in kg | 7 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity(hand guided) | 18 mm |
| Shipping weight: | 12,90 kg |
| Dimensions ( Length × Width × Height ): | 79,00 × 60,00 × 40,00 cm |
Technical data
Paris 500 TECHNICAL DETAILS:
| adjustment range cutting current |
20 - 50 A |
| switch-on time (ED) Plasma cutter 40°C |
50A at 100V 30% |
| mains voltage |
1x230V |
| mains frequency |
50 - 60 Hz |
| Protection class |
IP23 |
| Dimensions in mm (L x W x H) |
380 x 160 x 320 |
| weight in kg |
7 |
| standards |
EN60974- 1 / EC60974-1 |
| Maximum cutting capacity (manually guided) |
18 mm |
| Quality Cutting capacity (manually guided) |
14 mm |
Scope of delivery
- Plasma cutter
- Plasma torch: PT-31 (9 mandrel, 2 pole), 4m
- Welding gloves
- Automatic welding helmet
- Ground tongs (9 mandrel), 3m cable
- Gas connection hose
- Water separator
- Plasma wear parts-SET 30 pieces
