
Item number: C1049VD
PLASMA CUTTER C41
The C41 from Vector Welding is a plasma cutter with contactless ignition. The device is a strong and reliable partner in the areas of installation, repair, maintenance and DIY.
The cutting current is infinitely adjustable from 20-40A. The C41 achieves a Quality cuts up to 14mm.
C41 FEATURES & Benefits:
- Plasma cutters: A plasma beam generated by electricity melts the material and it drains with compressed air - a precise Cut is created. This procedure can be used to Metal cutting (e.g. steel, stainless steel, aluminium, copper, etc.)
- contactless Ignition: first-class ignition behaviour without contact with the workpiece
- Cutting thickness Steel: maximum 20mm (hand-guided), Quality cut average up to 14mm (hand led).
- Cutting thickness Aluminum: maximum 14mm (hand-guided), Quality cut average up to 9mm (hand led).
- Cutting current infinitely adjustable from 20-40A
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents Overheat protection
C41 FEATURES:
C41 TECHNICAL DETAILS:
Setting range cutting current | 20-40A |
Switch-on time (ED) Plasma cutter 40°C | 40A at 96V 40% |
Voltage | 230V/1Phase |
Frequency | 50 - 60 Hz |
Protection | IP23S |
Dimensions in mm | 385 x 170 x 325 |
Weight in kg | 13 |
Standards | EN60974-1 / EC60974-1 |
Maximum cutting capacity (hand-guided) | 20 mm |
Quality cutting capacity (hand-guided) | 14 mm |
C41 Control panel:

1. Display | 4. Overheating indicator | 7. "+" Button |
2. On/Off | 5. Plasma burner display | 8. "-" Button |
3. Pilot indicator | 6. Air pressure test display |
C41 TECHNICAL DETAILS:
setting range cutting current | 20-40A |
switch-on time (ED) Plasma cutter 40°C | 40A at 96V 40% |
mains voltage | 230V/1phase |
mains frequency | 50 - 60 Hz |
Protection class | IP23S |
Dimensions in mm | 385 x 170 x 325 |
weight in kg | 13 |
standards | EN60974- 1 / EC60974-1 |
Maximum cutting capacity (manually guided) | 20 mm |
Quality Cutting capacity (manually guided) | 14 mm |
C41 Scope of Delivery:
Plasma cutter C41 |
Plasma burner: PT 40, Euro central connection, 6m |
Ground pliers with ground cable (13 thorns), 3m |
Gas connection hose |
Accessories |
For Standard accessories | For Optional accessories | ||||
![]() | ![]() | ![]() | ![]() | Brand:PARKER PLASMA torch: SCP 40 Cooling Method: Air-Cooled Rating: 40A Cutting Thickness: 8-12mm Duty Cycle: 60% Gas: Air/N2 Gas Pressure: 4.5-5.0 bar 65-75 psi Gas Flow: 100 l/min 210 scfh Pilot: Electrode to Tip Ignition: Back Striking Without HF Post Flow: 90 sec | |
PLASMA torch: PT40 Current: 40 Amp Duty Cycle: 60% Gas: AIR/N2 Gas Pressure: 4.5-5.0 Bar Gas Flow: 100 LPM Ignition: Without HF Post Flow: 35 sec.recommended Standard Length: 6M | Electrode holder with cable 3M | Air regulator AW2000 |