
article
number: C1053SIWM
PLASMA CUTTER PARIS 500
The Paris 500 from Vector Welding is a Plasma cutter with contact ignition. Its light weight of 7 kg makes it a handy and reliable partner in the fields of installation, repair, maintenance and DIY.
The cutting current isinfinitely variable from 20-50A. The
Plasma cutter convinces with a good cutting quality and high cutting
speed. The Paris 500 achieves a maximum cutting
thickness of 18 mm and average quality cuts up to 12mm.
Paris
500 PROPERTIES & ADVANTAGES:
- Plasma cutter: A plasma beam generated by electricity melts the material and removes it with compressed air – a precise cut is produced. With this process all conductive metals can be cut (e.g. steel, stainless steel, aluminium, Copper, etc.)
- contact ignition: first-class ignition
behavior, when stroking over the workpiece the ignition takes place
- cutting thickness steel: maximum up to 18mm (hand-guided). quality cut 14mm (hand-guided)
-
cutting
thickness aluminium: maximum up to 12mm
(hand-guided). quality cut 8mm (hand-guided)
-
cutting current
infinitely variable from 20-50A
- modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
- overheat
protection
Paris
500 FEATURES:
Paris
500 TECHNICAL DETAILS:
setting range cutting current | 20 - 50 A |
duration of operation (ED) plasma
cutter 40°C | 50A at 100V 30% |
mains voltage | 1x230V |
Network frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 380 x 160 x 320 |
Weight in kg | 7 |
Standards | EN60974-1 / EC60974-1 |
Maximum cutting capacity (manually
guided) | 18 mm |
quality cutting capacity
(hand-guided) | 14 mm |
Paris 500 TECHNICAL DETAILS:
setting range cutting current | 20 - 50 A |
switch-on time (ED) Plasma cutter 40°C | 50A at 100V 30% |
mains voltage | 1x230V |
mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 380 x 160 x 320 |
weight in kg | 7 |
standards | EN60974- 1 / EC60974-1 |
Maximum cutting capacity (manually guided) | 18 mm |
Quality Cutting capacity (manually guided) | 14 mm |
Paris 500 Scope of delivery:
plasma cutter Paris 500 |
plasma torch: PT-31 (9 mandrel, 2 pole), 4m |
ground clamp with ground cable (9 mandrel), 3m |
water separator |
gas connection hose |