Item number:A2002B
ELECTRODE WELDERARC 200 G
The ARC200G from Vector Welding is an electrode welder with 10-200A. The handy size of 23,5x9,7x17cm with 2,5kg makesthe device the optimal companion for outdoor use.
The ARC 200G has a hotstart function. In this case, ignition is performed with increased current, the workpiece is sufficiently heated and thus a safe ignition is ensured. The arc force can be adjusted using ArcForce.
Thanks to the IGBT, the ARC 200G has a high pulse load capacity and offers a precise and efficient electrode welding process.
ARC200G FEATURES & BENEFITS:
-
MMA/STICK/E-HAND:coated electrodes are used - in this process, the electrodes are arc carrier and filler metal in one.
-
Hotstart:overcurrent is provided each time the welder is restarted, thus assisting arc ignition.
-
ArcForce: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
-
Anti-stickautomatically shuts down the welding generator when the electrode sticks to the workpiece and must be removed manually without damaging the electrode clamp.
-
advanced IGBT(InsulatedGate Bipolar Transistor) enables fast, low-loss switching of electrical currents.
-
overheat protection
ARC200G FEATURES:
ARC200G TECHNICAL DETAILS:
| Setting rangeWelding current (MMA/STICK mode) | 10 - 200 A |
| Duty cycle (ED) MMA/STICK40°C | 200 A at 28V 20% |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm | 235 x 97 x 170 |
| Weight in kg | 2,5 |
| Standards | EN60974-1 / IEC60974-1 |
| Shipping weight: | 4,30 kg |
| Dimensions ( Length × Width × Height ): | 28,50 × 19,50 × 21,50 cm |
ARC 200G TECHNICAL DETAILS:
| adjustment range welding current (MMA/STICK mode) |
10 - 200 A |
| duty cycle (ED) MMA/STICK 40°C |
200 A at 28V 20% |
| mains voltage |
1 x 230 Volt |
| mains frequency |
50 - 60 Hz |
| protection class |
IP23 |
| dimensions in mm |
235 x 97 x 170 |
| weight in kg |
2, 5 |
| standards |
EN60974-1 / IEC60974-1 |
- Electrode welder
- Electrode pliers 200A (9 mandrel), 3m cable
- Ground tongs (9 mandrel), 3m cable
- 10x steel rod electrodes
- Welding gloves
