schweissgeraet-amsterdam2000-schweißgerät-elektrode-elektrodenschweißgerät-mma-stick-ehand-hand-200a-vector-welding

schweissgeraet-amsterdam2000-schweißgerät-elektrode-elektrodenschweißgerät-mma-stick-ehand-200a-vector-welding

Electrode welder, MMA electrode 200A, IGBT | Amsterdam 2000II

SKU: A2003B
GTIN: 4251210405239
Category: Stick Welders ARC
Manufacturers: VECTOR WELDING

Electrode welder, MMA electrode 200A, IGBT | Amsterdam 2000II

VECTOR WELDING Electrode Welding Unit Amsterdam 2000II

MMA 20-200A

Hotstart, Arc Force, Anti-Stick

IGBT

overheating protection

159,00 €

incl. 19% VAT , (Standard)

Old price: 179,00 €

Manufacturers recommended retail price: 309,00 €

(Save 48.54%, i.e. 150,00 €)

Available immediately
Delivery time: 2 - 3 Workdays in Germany

pcs.

Item number: A2003B

ELECTRODE WELDING DEVICE AMSTERDAM 2000II

The Amsterdam 2000II from VECTOR WELDING is an electrode welding machine with 20-200A.
The Amsterdam 2000II machine has a hot start function. This means that the welder is ignited with increased current, the workpiece is heated sufficiently and thus a safe ignition is guaranteed. The arc force can be adjusted using ArcForce.
Thanks to IGBT the Amsterdam 2000 has a high pulse load capacity and offers a precise and efficient electrode welding process.

AMSTERDAM 2000II PROPERTIES & BENEFITS:

MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are Arc carrier and filler metal in one.
hotstart: for each restart of the welding machine is overcurrent and thus the ignition of the arc supported.
Arc Force: Melted Material transfers more easily to the workpiece. Prevents the arc from being extinguished when it is material comes into contact between the electrode and the molten bath.
Anti-stick: switch automatically switches off the welding generator when the electrode is workpiece is stuck and can be removed by hand without damaging the electrode clamp.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection

AMSTERDAM 2000II TECHNICAL DETAILS:

adjustment range welding current (MMA/STICK mode)	20 - 200 A
duty cycle (ED) MMA/STICK 40°C	200 A at 28V 60%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
dimensions in mm	320 x 160 x 380
weight in kg	6, 5
standards	EN60974-1 / IEC60974-1

Shipping weight:	9,00 kg
Dimensions ( Length × Width × Height ):	51,50 × 30,00 × 39,00 cm

AMSTERDAM 2000 TECHNICAL DETAILS:

adjustment range welding current (MMA/STICK mode)	20 - 200 A
duty cycle (ED) MMA/STICK 40°C	200 A at 28V 20%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
dimensions in mm	320 x 160 x 380
weight in kg	6, 5
standards	EN60974-1 / IEC60974-1

Amsterdam2000 Scope of delivery:

Electrode welderAmsterdam 2000

Electrode gun (9 mandrel), 3m

Ground tongs with ground cable (9 mandrel),3m