ELECTRODE WELDERARC 200K
The ARC200K from Vector Welding is an electrode welder with 10-200A. The handy size of 23,5x11x17,5cm with 2,5kg makesthe device the optimal companion for outdoor use.
The device ARC 200K has a hotstart function. In this case, ignition is performed with increased current, the workpiece is sufficiently heated and thus a safe ignition is ensured. The arc force can be adjusted using ArcForce.
Thanks to the IGBT, the ARC 200K has a high pulse load capacity and offers a precise and efficient electrode welding process.
ARC200K FEATURES & BENEFITS:
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are arc support and filler metal in one.
Hotstart: every time the welder is restarted, overcurrent is provided to help ignite the arc.
Arc Force: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
Anti-stick automatically shuts down the welding generator when the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
advanced IGBT(InsulatedGate Bipolar Transistor) enables fast, low-loss switching of electrical currents.
ARC200K TECHNICAL DETAILS:
|Setting rangeWelding current (MMA/STICK mode). ||10 - 200 A |
|Duty cycle (ED) MMA/STICK40°C ||200 A at 28V 20% |
|Mains voltage ||1 x 230 Volt |
|Mains frequency ||50 - 60 Hz |
|Protection class ||IP23 |
|Dimensions in mm ||235 x 110 x 175 |
|Weight in kg ||2,5 |
|Standards ||EN60974-1 / IEC60974-1 |
|Shipping weight:||4,70 kg|
|Dimensions ( Length × Width × Height ):||29,00 × 20,00 × 23,00 cm|
ARC 200K TECHNICAL DETAILS:
|adjustment range welding current (MMA/STICK mode)
||10 - 200 A
| duty cycle (ED) MMA/STICK 40°C
||200 A at 28V 20%
||1 x 230 Volt
||50 - 60 Hz
|dimensions in mm
||235 x 110 x 175
|weight in kg
||EN60974-1 / IEC60974-1
- Electrode welder
- Electrode pliers 200A (9 mandrel), 3m cable
- Ground tongs (9 mandrel), 3m cable