WELDING MACHINE MIG 295A - POWER PACK FOR MIG/MAG, MMA AND TIG
The MIG 295A from VECTOR WELDING is a powerful MIG/MAG welding machine with a wide range of applications. It offers 30-295 A in MIG/MAG mode, 30-250 A in MMA mode and 10-280 A in TIG mode.
Thanks to the automatic wire feed, the device is particularly suitable for clean welding - even in hard-to-reach places. The settings for amperage and wire feed can be precisely adjusted and adapted to different wire thicknesses.
The set contains everything you need: MIG 295A welding machine, automatic welding helmet, 5 kg wire reel and a comprehensive accessory pack - ideal for workshops, assembly or ambitious DIY enthusiasts.
FUNCTIONS AND ADVANTAGES
-
MIG/MAG welding: With automatic wire feed. MIG for non-ferrous metals with argon or helium, MAG with CO₂ or mixed gas for steel.
-
Wire thickness selection: 0.6 mm / 0.8 mm / 1.0 mm - preset values for amperage and feed rate, manually fine-tunable.
-
SPL mode: Enables separate setting of amperes, volts and feed speed. High flexibility for individual setups.
-
Inductivity: Infinitely variable for a soft arc and clean, spatter-free seams.
-
2-cycle / 4-cycle function: For flexible working, even with longer weld seams.
-
MMA/electrode welding: Uses coated electrodes - robust, uncomplicated, versatile.
-
Hotstart: Facilitates ignition through brief overcurrent.
-
Arc Force: Stabilizes the arc during difficult transitions.
-
Anti-stick: Disconnects the circuit if the electrode sticks - protects the device and workpiece.
-
DC TIG welding: For fine work on almost all metals. Ignition via Lift-Arc - safe and reliable.
-
IGBT technology: Modern inverter technology for high efficiency and compact design.
-
Overheating protection: Automatic safety cut-out if temperatures are too high.
TECHNICAL DATA
-
MIG/MAG: 30-295 A
-
MMA: 30-250 A
-
TIG: 10-280 A
-
ED at 295 A (MIG/MAG): 60 %
-
Mains voltage: 3-phase, 400 V
-
Mains frequency: 50-60 Hz
-
Protection class: IP23S
-
Dimensions (L x W x H): 493 x 222 x 375 mm
-
Weight: 13 kg
-
Standards: EN60974-1 / IEC60974-1
-
Wire diameter: 0.6 / 0.8 / 1.0 mm
SYSTEM OPERATION
- On/Off
- Overheating indicator
- Parameter setting
- Welding mode selection: MIG/MAG, MMA, TIG
- Display for amperes, volts, inductance
- 2-stroke / 4-stroke selection
- Wire thickness selection
