VECTOR Digital Welding machine DC TIG T231 Plus Inverter TIG ARC MMA STICK Electrode

dc-wig-schweißgerät-puls-puls-inverter-t231-vector-welding

DC TIG welder 200A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | T231

SKU: T1038VD
GTIN: 4251210402467
Category: TIG Welder
Manufacturers: VECTOR WELDING

DC TIG welder 200A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | T231

2 pcs. sold in last 9 hours

VECTOR WELDING welding device T231

DC TIG 5-200A

High frequency ignition

MMA/electrode 5-200A

IGBT

549,00 €

incl. 19% VAT , (Standard)

Old price: 849,00 €

Manufacturers recommended retail price: 1.099,00 €

(Save 50.05%, i.e. 550,00 €)

Available immediately
Delivery time: 2 - 3 Workdays in Germany

pcs.

Article number: T1038VD

DC TIG WELDER T231

The strong T231 from Vector Welding is a DC TIG welder with 200A in TIG mode and 200A in MMA (electrode) mode.

Thank you IGBTthe T231 has a high pulse load capacity and offers a precise and efficient TIG welding process.

The HF-ignition and the necessary control, power and working capacity, make it possible to carry out a wide range of professional welding jobs. the T231 offers everything you need for metal welding.

T231 PROPERTIES & ADVANTAGES:

DC-TIG welding: welding of almost all metalsof almost all metals
pulse function: during pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
high-frequency ignition (TIG)
2 cycle/ 4 cycle
MMA/STICK/E-HAND: coated electrodes are used - in this process, dthis process combines the electrodes, arc carrier and filler metal in one.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
hot start: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick switches off the welding generator automatically if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
overheating protection
9 memory locations

T231 FEATURES:

T231 TECHNICAL DETAILS:

setting range welding current (TIG mode)	5 -200 A
setting range welding current (MMA/STICK mode)	5 -200 A
duration of operation (ED) TIG 40°C	200 A at 18 V 60%
Duration of operation (ED) MMA/STICK 40°C	200 A at 28 V 60%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	395 x 180 x 370
Weight in kg	10.9
Standards	EN60974-1 / IEC60974-1

T231 CONTROLLER:

1. On/Off - Overheat indicator	4. PULSE function	7. Hotstart/Arc Force/Anti-Stick
2. welding mode (MMA/WIG)	5. + and - buttons	8. JOB and STORE
3. 2 bar/4 bar	6. voltage display/volt

1. gas flow	5. secondary current strength	9. final current
2. start current	6. pulse duration (10%-90%)	10. gas flow
3. current rise	7. pulse frequency (1Hz-200Hz)
4. current strength	8. current reduction

Shipping weight:	17,00 kg
Dimensions ( Length × Width × Height ):	40,00 × 19,00 × 35,00 cm

T231 TECHNICAL DETAILS:

Welding current setting range (TIG mode)	5-200 A
Welding current setting range (MMA/STICK mode)	5 -200 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 60%
Duty cycle (ED) MMA/STICK 40°C	200 A at 28 V 60%
Mains voltage	1 x 230 V
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	395 x 180 x 370
Weight in kg	10,9
Standards	EN60974-1 / IEC60974-1