DC TIG welder 200A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | T231
Codice articolo: T1038VD

DC TIG welder 200A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | T231

Codice articolo: T1038VD
disponibilità immediata

Tempo di consegna: 2 - 3 giorni lavorativi

849,00 €

compr. 19% IVA, Consegna senza spese di spedizione Entro DE,Spedizione (Standard)

UVP dal produttore: 1.099,00 €
(Lei risparmia 22.75%, ovvero 250,00 €)

VECTOR WELDING welding device T231

DC TIG 5-200A

High frequency ignition

Lift Arc

MMA/electrode 5-200A

IGBT

 
#custom.viewsdetails#
Welder T231

Article number: T1038VD

DC TIG WELDER T231

The strong T231 from Vector Welding is a DC TIG welder with 200A in TIG mode and 200A in MMA (electrode) mode.

Thank you IGBTthe T231 has a high pulse load capacity and offers a precise and efficient TIG welding process.

The HF-ignition and the necessary control, power and working capacity, make it possible to carry out a wide range of professional welding jobs. the T231 offers everything you need for metal welding.

T231 PROPERTIES & ADVANTAGES:

  • DC-TIG welding: welding of almost all metalsof almost all metals
  • pulse function: during pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
  • high-frequency ignition (TIG)
  • lift-arc start: Enables AC or DC arcs to be started without high frequency.
  • 2 cycle/ 4 cycle
  • MMA/STICK/E-HAND: coated electrodes are used - in this process, dthis process combines the electrodes, arc carrier and filler metal in one.
  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
  • hot start: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
  • Arc Force: Melted material is transferred more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
  • Anti-Stick switches off the welding generator automatically if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
  • overheating protection
  • 9 memory locations

T231 FEATURES:

Gealt=

T231 TECHNICAL DETAILS:

setting range welding current (TIG mode)
5 -200 A
setting range welding current (MMA/STICK mode)
5 -200 A
duration of operation (ED) TIG 40°C
200 A at 18 V 60%
Duration of operation (ED) MMA/STICK 40°C
200 A at 28 V 60%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23S
Dimensions in mm (L x W x H)
395 x 180 x 370
Weight in kg
10.9
Standards
EN60974-1 / IEC60974-1

T231 CONTROLLER:

T231 Control Panel
1. On/Off - Overheat indicator
4. PULSE function
7. Hotstart/Arc Force/Anti-Stick

2. welding mode (MMA/WIG)
5. + and - buttons
8. JOB and STORE
3. 2 bar/4 bar
6. voltage display/volt


Welder T231 Setting details
1. gas flow
5. secondary current strength
9. final current
2. start current
6. pulse duration (10%-90%)
10. gas flow
3. current rise
7. pulse frequency (1Hz-200Hz)

4. current strength
8. current reduction


T231 TECHNISCHE DETAILS:

Einstellbereich Schweißstrom (WIG  Modus)
5-200 A
EInstellbereich Schweißstrom (MMA/STICK Modus)
5 -200 A
Einschaltdauer (ED) WIG 40°C
200 A bei 18 V 60%
Einschaltdauer (ED) MMA/STICK 40°C
200 A bei 28 V 60%
Netzspannung
1 x 230 Volt
Netzfrequenz
50 - 60 Hz
Schutzart
IP23S
Maße in mm (L x B x H)
395 x 180 x 370
Gewicht in kg
10,9
Normen
EN60974-1 / IEC60974-1

T231 Lieferumfang:

DC WIG Schweißgerät T231
WIG-Brenner: WP-26 (13 Dorn, 5 pol.), 4m, Lederüberzug, Gasschnellverschluss
WIG- Set, 14-teilig
Elektrodenzange 200A (13 Dorn), 3m
Massezange mit Massekabel 200A (13 Dorn), 3m
Gasverbindungsschlauch

Garantiebestimmungen

VectorDigital Produktkatalog

Bedienungsanleitung

PDF

PDF

PDF

Datenblatt

I clienti hanno acquistato anche i seguenti prodotti