AC/DC TIG Welder 200A & Plasma Cutter 50A, MMA Electrode 170A, HF-Ignition, Alu | 200D analogue
Item number: K2001
Item number: K2001
WELDER + PLASMA CUTTER 200P
The
AC/DC TIG PLASMA 200P from Vector Welding is a
combination unit for welding and plasma cutting. With 10-200A
in TIG mode, 30-170A in MMA/electrode mode
and plasma cutting with 10-50A the unit is well
suited for installation, repair, maintenance and DIY.The lightweight
200P offers everything you need for metal welding or cutting.
It processes all weldable metals, including aluminum.
200 D FEATURES & ADVANTAGES:
- 3 in1 combi device: AC/DC TIG, MMA/STICK, Plasma cutting
- AC/DC TIG welding: Processing of all weldable metals, including aluminum
- HF Ignition (TIG)
- MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
- Hot Start: each time the welding machine is restarted, overcurrent is provided to support the ignition of the arc.
- Arc-Force: melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between the electrode and molten pool.
- Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
- Plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this method all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
- Cutting thickness: maximum 16mm (hand-guided), quality cut 10mm (hand-guided) modern IGBT (Insulated Gate Bipolar Transistor) allows fast and therefore low-loss switching of electrical currents
- Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
200P
TECHNICAL DETAILS:
| Adjustment range welding current
(TIG) | 10-200 A |
| Adjustment range welding
current (MMA/Elektrode) | 30 -170 A |
| Setting range welding current (CUT
mode) | 10 - 50 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% 126 A at 15 V 100% |
| Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8 V 25% 85 A at 23,4 V 100% |
| Duty cycle (ED) Plasma cutter
40°C | 40 A at 96 V 40% 25 A at 90 V 100% |
| Input Voltage | 1 x 230 Volt |
| Power frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight (kg) | 9,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually
guided) | 12 mm |
| Quality cutting capacity (hand
guided) | 8 mm |
200 D TECHNISCHE DETAILS:
| Adjustment range welding current (TIG) | 10-200 A |
| Adjustment range welding current (MMA/Elektrode) | 10 -170 A |
| Setting range welding current (CUT mode) | 10 - 50 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK 40°C | 170 A at 26.8 V 25% |
| Duty cycle (ED) Plasma cutter 40°C | 50 A at 100 V 40% |
| Input Voltage | 1 x 230 Volt |
| Power frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight (kg) | 9,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually guided) | 12 mm |
| Quality cutting capacity (hand guided) | 8 mm |
200 D Scope of delivery:
| AC/DC TIG 200PD welding machine and plasma cutter |
| TIG_torch: WP-26 (9 mandrel, 5 pole), 4m with gas quick release >br> |
| plasma torch: PT-31 (9 mandrel, 2 pole), 4m |
| Gas connection hose |
| Electrode pliers 200A (9 mandrel), 3m |
| Ground clamp with ground cable (9 mandrel), 3m |
