-
Flux-cored welding with automaticWire feed. No gas is used when welding with the MIG145A, the matching NoGas welding wire achieves convincing results together with this device.
-
The wire feed speed can be controlled by the volt: a higher volt results in a slower wire feed, lower volt speeds up the wire feed. A great advantage when individual adjustment is desired.
-
Inductance:The unit has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise to improve weld quality and precision.
-
MMA/STICK/E-HAND:coated electrodes are used - in this process, the electrodes are an arc support and filler metal in one.
-
Hotstart:overcurrent is provided each time the welder is restarted, thus assisting the ignition of the arc.
-
ArcForce: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
-
Anti-stickautomatically shuts off the welding generator when the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
-
DC TIG welding(optional: only possible with additional hose package and cables): Welding of almost all metals.
-
LiftArc: Ignition occurs on contact with the workpiece, then the torch can be lifted and welding starts with the selected parameters.
-
modern IGBT(InsulatedGate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents.
-
overheating protection
