NewYork 2500 Kombi TIG Welding Machine AC/DC TIG 200 Puls Plasmautter TIG MMA E-Hand Inverter 5 in1

Sale 10%

acdc-wig-kombi-gerät-schweißgerät-plasmaschneider-3in1-NewYork2500-mma-elektrode-vector-welding

acdc-wig-kombi-gerät-schweißgerät-plasmaschneider-NewYork2500-mma-ehand-elektrode-vector-welding

AC/DC TIG welder 200A with plasma cutter 50A, pulse, inverter, MMA electrode 170A, IGBT, HF ignition, aluminum | NewYork 2500

SKU: K1055VW-
GTIN: 4251210407080
Category: Welding machines
Manufacturers: VECTOR WELDING

AC/DC TIG welder 200A with plasma cutter 50A, pulse, inverter, MMA electrode 170A, IGBT, HF ignition, aluminum | NewYork 2500

29 sold in last 10 hours

VECTOR WELDING welder with plasma cutter New York 2500

AC/DC WIG 10-200A

PULSE function

HF ignition (TIG)

MMA/Electrode 10-170A

plasma cutter 50A

IGBT

Job memory

719,00 €

incl. 19% VAT , (Standard)

Old price: 799,00 €

Available immediately
Delivery time: 2 - 3 Workdays in Germany

Wählen Sie eine Variation aus: New York 2500: 719,00 €

759,00 €

819,00 €

1.009,00 €

Part Number: K1055VW

WELDING MACHINE + PLASMA CUTTER New York 2500

The NEW YORK 2500 from Vector Welding is a combination unit for welding and plasma cutting. Its adjustable AC/DC (alternating/direct current) mode allows it to work on all weldable metals, including aluminum.

With 10-200A in TIG mode, 10-170A in MMA/electrode mode and plasma cutting at 10-50A , the unit is well suited for installation, repair, maintenance and DIY.

The NEW YORK 2500 has everything you need for metal welding or cutting jobs.

NEW YORK 2500 FEATURES & BENEFITS:

3in1 combination unit: AC/DC TIG, MMA/STICK, plasma cutting.
AC/DC TIG welding: processing of all weldable metals,including aluminum
AdjustableAC output frequency allows the operator to focus the arc and minimize the heat-affected zone
AdvancedAC balance control helps maintain a pointed tungsten needle to precisely control the arc in the weld joint.
Pulse function: inPulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece.
HF ignition (TIG )
2cycle/4cycle
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are arc carrier and filler metal in one.
Hotstart: every time the welder is restarted, an overcurrent is provided to support the ignition of the arc.
Arc-Force: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool .
Anti-stick: automatically shuts down the welding generator if the electrode sticks to the workpiece and must be removed manually without damaging the electrode clamp.
Plasma cutter: CUT function using a plasma jet generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. This method can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.).
cutting thickness: maximum 12mm (hand guided), quality cut 8mm (hand guided)
advancedIGBT (InsulatedGate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
job memory:the new york 2500 has9 memory locations

NEW YORK 2500 FEATURES:

NEW YORK 2500 TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10 -200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current adjustment range (CUT mode)	20 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40% duty cycle
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	380 x 160 x 360
Weight in kg	11,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand guided)	13 mm
Quality cutting capacity (hand guided)	8 mm

NEW YORK 2500 SYSTEM CONTROL:

1. display	5. on/off	9. selection key
2. PULSE function	6. overheat indicator	10. hot start/arc force/anti stick
3. 2 beat/4 beat	7. JOB and SAVE	11. parameter settings
4. mode (MMA/WIG/CUT)	8. AC/DC mode

1. gas advance	5. secondary current	9. final current
2. start current	6. pulse width (%)	10. gas overrun
3rd current rise	7. pulse frequency (Hz)	11. AC frequency
4. welding current (primary)	8. current decrease	12. AC Balance

Shipping weight:	16,30 kg
Dimensions ( Length × Width × Height ):	51,50 × 30,00 × 39,00 cm

NEW YORK 2500 TECHNICAL DETAILS:

Adjustment range welding current (TIG)	10 -200 A
Adjustment range welding current (MMA/Elektrode)	10 -170 A
Setting range welding current (CUT mode)	20 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40%
Input Voltage	1 x 230 Volt
Power frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	380 x 160 x 360
Weight (kg)	11,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)	13 mm
Quality cutting capacity (hand guided)	8 mm

Welding & Plasma Cutter Combination Unit
TIG torch: WP-26 (gas/electricity combination connection), 4m
Plasma torch: AG 60 (gas/electricity combination connection), 4m
Gas connection hose
Water separator
Electrode pliers 200A (9 mandrel), 3m cable
Ground tongs (9 mandrel), 3m cable