Item number: T1054VW
AC/DC TIG Welder - London 2400
The AC / DC TIG welder London 2400 from Vector Welding is based on the digital system. It offers a precise, professional AC/DC TIG welding process.
With the London 2400 all weldable metals, including aluminium, can be processed.
The machine works with 200A in TIG mode and 170A in MMA/Electode/Stick mode.Simple operation and full functions: All necessary controls for direct current, alternating current TIG welding with HF ignition or MMA/electode welding with contact ignition can be quickly set via the control panel.
London 2400 FEATURES & ADVANTAGES:
AC/DC TIG: welding of all weldable metals including aluminium
The adjustable AC output frequency allows the operator to focus the arc to minimize the heat affected zone.
The advanced AC balance control helps to maintain a sharp tungsten needle to precisely control the arc in the weld joint.
Pulse function: during pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
Continuous output control: Focus the arc for different material thicknesses. Strong for heavy duty: 200A in TIG mode & 170A in MMA mode.
Trigger Control: 4T/2T
MMA/electrodes/stick: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart:every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc-Force: Melted material is transferred more easily to the workpiece. Prevents the arc from extinguishing if this material causes contact between electrode and molten pool.
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp
9 memory locations for individual setting of the welding parameters.
London 2400 FEATURES:
London 2400 TECHNICAL DETAILS:
| Adjustment range welding current (TIG) | 10 -200 A |
| Adjustment range welding current (MMA/Elektrode) | 10 -170 A |
| Duty cycle TIG 20°C | 200 A at 18V 40% |
| Duty cycle MMA 20°C | 170 A at 26,8V 25% |
| Input Voltage | 1 x 230 Volt |
| Power frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 525 x 260 x 445 |
| Weight (kg) | 11 |
| Standards | EN 60974-1 / IEC 60974-1 |
| Cooling | Fan cooled |
| Welder type | Inverter power source |
| 1. Display | 5. Power on/off | 9. Setting of welding parameters |
| 2. PULS Function | 6. Overheating indicator | 10. Hotstart/Arc Force/Anti Stick |
| 3. 2T/4T Trigger | 7. JOB and SAVE | 11. Setting display |
| 4. Welding mode (MMA/TIG) | 8. AC/DC Mode |
London 2400 SETTING DETAILS:
| 1. Gasflow | 6. Pulse width | 11. AC Frequency (50-200HZ) |
| 2. Load power capacity | 7. Pulse frequency (HZ) | 12. Electricity shifting (10-50%) |
| 3. Electricity increase | 8. Current reduction | REM=Remote/remote control light |
| 4. Primary current | 9. Closing current | |
| 5. Secondary current | 10. Gas after-run |
London 2400 TECHNICAL DETAILS:
| Adjustment range welding current (TIG) | 10 -200 A |
| Adjustment range welding current (MMA/Elektrode) | 10 -170 A |
| Duty cycle TIG 20°C | 200 A at 18V 40% |
| Duty cycle MMA 20°C | 170 A at 26,8V 25% |
| Input Voltage | 1 x 230 Volt |
| Power frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 525 x 260 x 445 |
| Weight (kg) | 11 |
| Standards | EN 60974-1 / IEC 60974-1 |
| Cooling | Fan cooled |
| Welder type | Inverter power source |
London 2400 Scope of delivery:
| AC/DC TIG welding machine London 2400 |
| WIG torch: WP-26, 4m |
| WIG- Set, 14 pieces |
| Electrode pliers (9 mandrel), 3m |
| Ground clamp with ground cable (9 mandrel), 3m |
| Gas connection hose |
▶ DISPLAY
| 1. Display | 5. Power on/off | 9. Parameter setting |
| 2. PULS Function | 6. Overheating indicator | 10. Hotstart/Arc Force/Anti Stick |
| 3. 2T/ 4T | 7. JOB and SAVE | 11. Settings display |
| 4. Welding mode (MMA/TIG) | 8. AC/DC mode |
▶ DISPLAY DETAILS (TIG)
| 1. Gas flow/Gas lead time | 6. Pulse width | 11. AC frequency (50-200HZ) |
| 2. Starting current | 7. Pulse frequency (HZ) | 12. AC Balance (10-30%) |
| 3. Current increase | 8. Current reduction | REM=Remote |
| 4. Primary current | 9. Final current | |
| 5. Secondary current | 10. Gas follow-up |
▶ TIG SETTING OPTIONS
Following we explain the setting options for TIG welding - setting sequence can be found in DISPLAY DETAILS (TIG). In our example we weld steel sheet with thickness 1,5mm. Please note that welding parameters are always to be adjusted individually to your project.
1. Set gas lead time (from 0.1 to 10 seconds), we choose 0.4 Sec. Rule of thumb: 0.1 seconds per meter of hose package is a good basic setting.
2. Starting current: Adjustable between 10 and 200 amps, depending on the main current selected, we choose 30 amps for our example, since we will be welding at 60 amps. This allows us to achieve a "softer" ignition, which is particularly advantageous for thin sheets. CAUTION: These settings are only active in 4T mode.
3. Current increase: Here we set the speed at which the device changes from the starting current to the main current. The adjustable range depends on the main current. In our case, we choose 0.6 seconds.
4. Primary (main) current: Relatively welding current, which is adjustable between 10 and 200 amps. In our case, we choose 60 A.
5. Secondary (base) Current: When we pulse, we can set a second current (lower) here, and our welding current will alternate between the main current and the base current permanently. The proportion can be determined.
6. Pulse width: is given as a percentage and defines the proportion of the main current, versus the base current.
7. Pulse frequency (Hz): normally the pulse frequency is in the range up to 10Hz.
8. Current reduction: Here we define the time interval in which we lower the main current to the final current. We set here again 0.6 seconds, so we prevent the formation of the final crater.
9. Final current: we choose 30A, the same value as our starting current.
10. Gas follow-up time: especially important for stainless steel, as we achieve protected cooling of the weld pool on the workpiece. Our tungsten needle is also optimally cooled.
11. AC Balance: Relevant when welding aluminum with alternating current (AC). Here we control the time ratio between the positive and negative half-wave. The display is shown as a percentage. Decreasing the balance leads to a higher penetration depth, increasing it improves the cleaning effect.
12. AC Frequency: This sets the frequency of the AC current. Displayed is the frequency in Herz, adjustable between 10 and 200. This mainly allows us to influence the flow behavior of our weld pool. A higher frequency promotes a stable arc, but reduces the power resulting in a tough pool. At a lower frequency, the arc becomes more unstable but has high power, resulting in a thin-flowing bath, which allows us to weld thin sheets and fillet welds faster.
