Description
Item number: K2001B
WELDER + PLASMA CUTTER 200D
The AC/DC TIG PLASMA 200D from Vector Welding is a combination unit for welding and plasma cutting.
With 10-200A in TIG mode, 10-170A in MMA/electrode mode and plasma cutting at 10-50A, the unit is well suited for installation, repair, maintenance and DIY.
The lightweight 200D has everything they need for metal welding or cutting jobs. It handles all weldable metals, including aluminum .
200 D FEATURES & BENEFITS:
- 3in1 combination unit: AC/DC TIG, MMA/STICK, plasma cutting.
- AC/DC TIG welding: processes all weldable metals, including aluminum
- HF ignition (TIG)
- MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
- Hotstart: overcurrent is provided each time the welder is restarted, helping to ignite the arc.
- Arc-Force: molten material is more easily transferred to the workpiece. Prevents the arc from being extinguished if this material causes contact between the electrode and the molten pool.
- Anti-stick: automatically shuts down the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
- Plasma Cutter: CUT function using a plasma jet generated by electricity. This melts the material and carries it away with compressed air, creating a precise cut. All conductive metals can be cut with this method (e.g. steel, stainless steel, aluminum, copper, etc.).
- cutting thickness: maximum 12mm (hand guided), quality cut 8mm (hand guided)
- advanced IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
200 D FEATURES:
200 D TECHNICAL DETAILS:
| Welding current setting range (TIG mode) | 10-200 A |
| Welding current setting range (MMA/STICK mode) | 10 -170 A |
| Welding current setting range (CUT mode) | 10 - 50 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK 40°C | 170 A at 26.8 V 25% |
| Duty cycle (ED) Plasma cutter 40°C | 50 A at 100 V 40% duty cycle |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight in kg | 9,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (hand guided) | 12 mm |
| Quality cutting capacity (hand guided) | 8 mm |
200 D SYSTEM CONTROL:
| 1. display | 6. amperage (A) | 11. 2 stroke/ 4 stroke |
| 2. hotstart/arc force | 7. % selection | 12. mode (MMA/WIG/CUT) |
| 3. AC/DC mode | 8. frequency (Hz) | 13. parameter settings |
| 4. setting knob | 9. on/off | |
| 5. time (seconds) | 10. overheating indicator |
| 1. gas advance | 5. REM=remote/remote control light | 9. AC frequency |
| 2. start current | 6. current reduction | 10. AC Balance |
| 3. current increase | 7. final current | |
| 4. welding current | 8. gas overrun |
| Shipping weight: | 15,60 kg |
| Dimensions ( Length × Width × Height ): | 49,00 × 37,00 × 35,30 cm |
TECHNICAL DATA
200 D TECHNISCHE DETAILS:
| Adjustment range welding current (TIG) |
10-200 A |
| Adjustment range welding current (MMA/Elektrode) |
10 -170 A |
| Setting range welding current (CUT mode) |
10 - 50 A |
| Duty cycle (ED) TIG 40°C |
200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK 40°C |
170 A at 26.8 V 25% |
| Duty cycle (ED) Plasma cutter 40°C |
50 A at 100 V 40% |
| Input Voltage |
1 x 230 Volt |
| Power frequency |
50 - 60 Hz |
| Protection class |
IP23S |
| Dimensions in mm (L x W x H) |
425 x 152 x 291 |
| Weight (kg) |
9,5 |
| Standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity (manually guided) |
12 mm |
| Quality cutting capacity (hand guided) |
8 mm |
Scope of delivery
- Welding & Plasma Cutter Combination Unit
- TIG torch: WP-17 (9 mandrel, 5 pole, gas quick lock, 4m
- Plasma torch: PT-31 (9 mandrel, 5 pole, gas quick disconnect, 4m
- Gas connection hose
- Water separator
- Electrode pliers 200A (9 mandrel), 3m cable
- Earth clamp (9 mandrel), 3m cable
