mig-mag-migmag-schweißgerät-mig225-fülldraht-mma-elektrode-stick-automatische-drahtzufuhr-225a-vector-welding

mig-mag-migmag-schweißgerät-mig225-fülldraht-mma-elektrode-automatische-drahtzufuhr-225a-vector-welding

mig-mag-migmag-schweißgerät-mig225-fülldraht-mma-stick-automatische-drahtzufuhr-225a-vector-welding

Set de maquina de soldadura MIG MAG 225A, MMA 170A, IGBT | MIG225A con alambre, visera y accesorios

Número de artículo: M2225B1
EAN: 4251210407202
Categoría: Máquinas de soldadura MIG MAG
Fabricante: VECTOR WELDING

Set de maquina de soldadura MIG MAG 225A, MMA 170A, IGBT | MIG225A con alambre, visera y accesorios

2 vendidos en el último 10 Horas

VECTOR WELDING MIG/MAG welding device MIG 225A

MIG/MAG 30-225A

2 cycle/ 4 cycle

MMA/electrode 30-170A

IGBT

suitable: wire coils 1kg (D100) & 5kg (D200)

COMPLETE SET welding device, welding helmet, 2kg flux-cored wire and accessories

479,00 €

incluido 19% IVA , (Standard)

disponible de inmediato
Tiempo de entrega: 2 - 3 Días laborables en Alemania

Article number: M2225B1

WELDING EQUIPMENT SET MIG 225A

The MIG 225A from Vector Welding is a MIG/MAG welding equipment with 30-225A in MIG/MAG mode, 30-170A in MMA mode, and 10-200A in TIG mode (optional).

The MIG/MAGWelding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

This set is a fully-equipped consisting of MIG MAG welding device MIG 225A, welding helmet, 2kg welding wire (wire roll), as well as a comprehensive accessory set (see scope of delivery).

MIG 225A PROPERTIES & ADVANTAGES:

MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range.
In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise to improve the weld seam quality and precision
2 cycles/4 cycles (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hot start: every time the welding machine is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material passes more easily to the workpieceover. Prevents the arc from being extinguished if contact between the electrode and the molten pool is caused by this material.
anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: The ignition is triggered by contact with the welding cablewith the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
overheating protection

MIG 225A FEATURES:

MIG 225A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)	30 - 255 A
Adjustment range welding current (MMA/STICK mode)	30 - 170 A
Adjustment range welding current (TIG mode)	10 - 200 A
Duty cycle (ED) MIG/MAG 40°C	225 A at 25V 35%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8V 35%
Duty cycle (ED) TIG 40°C	200 A at 18V 35%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	391 x 153 x 282
Weight in kg	8
Standards	EN60974-1 / IEC60974-1
Wire diameter in mm	0.6/0.8

1. On/Off	4. welding mode	7. 2 cycle/ 4 cycle
2. superheat indicator	5. display screen	8. selection wire thickness
3. parameter setting	6. ampere/inductance/burn-back/voltage

Peso del envío:	16,87 kg
Medidas ( Longitud × Anchura × Altura ):	79,00 × 60,00 × 40,00 cm

MIG 225DETALLES TÉCNICOS:

Rango de ajuste de la corriente de soldadura (modo MIG)	30 - 225 A
Rango de ajuste de la corriente de soldadura (modo MMA/STICK)	30 - 170 A
Rango de ajuste de la corriente de soldadura (modo TIG)	10 - 200 A
Ciclo de trabajo (ED) MIG40°C, 10 min	225 A a 25 V 35%.
Ciclo de trabajo (ED) MMA/STICK40°C, 10 min	170 A a 26,8 V, 35%.
Ciclo de trabajo (ED) TIG40°C, 10 min	200 A a 18V 35
Tensión de red	230V +/- 15%
Frecuencia de red	50 - 60 Hz
Corriente de entrada efectiva	24,8A
Corriente de entrada (máx.)	41,9A
Diseño requerido del generador monofásico	15 kVA
Clase de protección	IP23
Tensión en circuito abierto (MIG/WIG/MMA)	60 V CC
Rodillo guía del hilo	0,6/0,8/1
Secuencia de gas (segundos)	3
Dimensiones en mm (L x A x A)	391 x 153 x 282
Peso en kg	8
Normas	EN60974-1 / IEC60974-1