SET: NewYork 2500 Kombi Profi Schweigert AC/DC WIG 200 Puls Mit Plasmaschneider ALU TIG MMA E-Hand Inverter 5 in1 + Fupedal

SET: NewYork 2500 Kombi Profi Schweigert AC/DC WIG 200 Puls Mit Plasmaschneider ALU TIG MMA E-Hand Inverter 5 in1 + Fupedal

Item number: K1055VW-SPF


739,00 €

including19% VAT. , no shipping costs to: DE , shipping (Standard)

(Net: 621,01 €)
Recommended retail price: 829,00 €
(You save 10.86%, that is 90,00 €)

Available now!
Profi-Schweigert mit Job-Speicher
Digitales Bedienfeld - Innovative Steuerung:
- Gleich / Wechselstrom WIG Schweien
- Einstellbare AC-Frequenz
- WIG Puls-Funktion - Impulsschweien
- MMA /ARC-Elektroden-Handschweien
- Plasma /CUT-schneiden bis 12 mm.

Lieferumfang + Fupedal

Category: TIG Weldingmachines

Newyork 2500

Quick
specs

Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
Maintenance and Repair
Pipe welding outside
Auto Body
Light Industry
Process:
DC TIG (GTAW)
AC TIG (GTAW)
Stick (MMA)
Plasma Cutting
Input Power: 230V, 1-Phase
Amperage Range: TIG/10-200A Stick/10-170A CUT/20-50A
Rated Output at40 C (104 F):
MMA:170A at 26.8V @ 25% Duty Cycle
TIG: 200A at 18V @ 40% Duty Cycle
CUT: 50A at 100V @ 40% Duty Cycle
Weight: 11,5KG
For TIG and Stick Welding
A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine
Newyork 2500 built base on the Mastertig System offers precise, expert AC/DC TIG welding process. It?s a precise aluminum welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs.
Newyork 2500 also comes with a 50A@60 heavy duty cycle plasma cutting power source. What you need for any metal welding or cutting works, you just get this combo machine and it?s all you needs. For TIG and Stick Welding
Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels.
Specialist Features
Precision Arc Performance:
DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Lift-Arc start provides AC or DC arc starting without the use of high frequency.
Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone
Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness.
Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
Powerful with heavy duty: 200A @50%.
10 channels memory capacity
Outstanding Quality:
Newly designed using the latest power electronic technology for improved reliability.
CE Certified.
2 Years Warranty on parts , 5 Years Warranty on Transformer
Technicalspecifications
Description VECTOR DIGITAL Newyork 2500 MULTIFUNCTION
Weight 31kg
PowerSourceDimensions L380mm x W160mm x H360mm
Cooling FanCooled
WelderType InverterPowerSource
EuropeanStandards EN60974-1/IEC60974-1
NumberofPhases 1
Nominal Supply Voltage 230V+/-15%
NominalSupplyFrequency 50/60Hz
Welding Current Range ( STICK Mode) 10 - 170A
Welding Current Range ( TIG Mode) 10 - 200A
Welding Current Range (CUT Mode) 20 - 50A
Effective Input Current /STICK /TIG 15.4A
Maximum Input Current/STICK/ TIG 30.9A
Single Phase Generator Requirement 10KVA
STICK (MMA) Welding Output, 40oC, 10 min. 170A @ 25%, 26.8V
85A @ 100%, 23.4V
TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 40%, 18V
126A @ 100%, 15V
CUTting Welding Output,40oC,10min. 50A @ 40%, 100V
25A @ 100%, 90V
Open circuit voltage 60V DC
Open circuit voltage CUT 250V DC
ProtectionClass IP23
CUT PERFORMANCE - MILD STEEL
Big cutting power in a small package - the
industry's most portable and powerful 40-amp
plasma cutter offers 10mm. mild steel cutting.
The unit offers easy connection to 115V or 230V
input with Auto-Line technology and MVP Adapters.
General View of Control Panel
Control Panel Parameter Values
1. Power ON Indicator
2. Pulse Button
3. Trigger Mode Control Button
4. Process Selection Button
5. Power ON Indicator
6. Thermal Overload Indicator
7JOB and SAVE
8.AC/DC Mode Button
9.Positive Control- Negative Control- Back Programming Button
10. Hot Start-Arcforce-Start time
General View of Contrl Panel(Continued)
.
Item Symbol Description
1 Gas Pre-Flow Absolute setting range 0.1s to 20s (0.1S increments)
2 Initial Current The main current Setting range 10AMP to 100AMP
3 Up Slope Setting ranges :0.1S-10S (0.1S increments)
4 Peak Current Setting ranges
10AMP to 200AMP (DC TIG mode), 10 to 200A (AC HF TIG mode)
5 Base Current Setting ranges
10AMP to 200AMP (DC TIG mode), 10AMP to 200AMP (AC HF TIG mode)
6 Pulse Width Setting ranges 10%-90%
7 PulseFrequency Setting ranges 1HZ -200HZ
8 Down Slope Setting ranges 0.1-10s
9 End current Setting ranges 10A-100A
10 Post Flow Setting ranges 1-20S
11 AC Frequency Setting ranges 50HZ-200HZ
12 Wave Balance Setting arranges 10%-50%
DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle IIn excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low
Background amperage- can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds
(Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential-which is extremely beneficial to automation wheremaximum travel tspeeds are required.
Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
Accessories
For Standard accessories
TIG torch: WP-17
Gas connector: M16
Cable length4M
5-pin control coupler
Electrode holder
with cable 2,5M/200A
AG 60-Torch/4M Earth clamp with cable 2,5m Reducing valve
AW2000
For Optional accessories
Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L

TIG torch: DGT 26
Cooling Method: Air-Cooled
Rating: DC 200A AC 125A
Duty Cycle: 35%
Electrode Size: 1.0-4.0


Trolley Foot Pedal
Trolley:
5-pin aviation plug

Welding Type: TIG AC/DC ARC/MMA/STICK
Plasma cutting: CUT contact
Brand: S-Series
Technologie: MOSFET
Funktion: DC Puls
Shipping weight: 14,25 Kg
Product weight: 13,00 Kg
Ausgangsstrom WIG 10-200 A
Ausgangsstrom MMA/ARC 10-200 A
Ausgangsstrom Plasma/CUT 10-45 A
Einschaltdauer WIG 60% bei 200 A
Einschaltdauer MMA/ARC 60% bei 200 A
Einschaltdauer Plasma/CUT 60% bei 45 A
Leerlaufspannung 56 V
Schutzklasse IP21S
Isolationsklasse F
Eingangsspannung 230 V AC (+-15%) / 1 ~
Eingangsfrequenz 50/60 Hz
Abzusichern mit min. 16 A
Maximaler Eingangsstrom 27 A
Maximale Eingangsleistung 6,2 kVA
Empfohlene Generatorleistung > 7 kVA / 1 ~
Gewicht 20,9 kg
Gre L x B x H mm ohne Griff 500 x 330 x 320
Gre L x B x H mm mit Griff 500 x 330 x 360
Netzstecker-Typ SchuKo-Bauart CEE 7/7
Normen IEC 60 974-1 ; CE ;
S-Kennzeichen


  • AC/DC WIG Schweien - Gleichstrom- und Wechselstrom- Schweien von nahezu allen Metallen (auch ALUMINIUM)
  • WIG Schweigert mit 200 A
  • ARC FORCE - Mit Sprhlichtbogen, auch ARC Force genannt, lsst sich die Lichtbogenweite regulieren.
  • ANTI-STICK - Verhindert das Klebenbleiben der Stabelektrode.
  • HOTSTART - Automatische Spannungserhhung beim Start fr bessere Schweiergebnisse.
  • MMA/ARC mit 200 A
  • CUT Plasmaschneider mit 50 A
  • CUT Kontakt - braucht leichten Kontakt zum Material.
  • 2T/4T-Modus
  • Stromregelung ber Fupedal mglich (nicht im Lieferumfang enthalten)
  • WIG High Frequency (HF) Zndung (Berhrungsloses Znden bei WIG).
  • WIG PULS - Verhindert das durchbrennen von Materialien und mindert Verformung durch Hitze.
  • Schweien in allen Lagen.
  • berhitzungsschutz (O.C. - Overheating Control)
  • Hohe Einschaltdauer
  • 230 V bei 16 A mglich.

Einstellbare Funktionen:

Gasvorlauf, Stromanstieg, Schweistrom, Impulsweite, Impulsfrequenz, Sprhlichtbogen, Startstrom, Impulsstrom, Stromabsenkung, Schlussstrom, Gasnachlauf, Stromverlagerung, 2T / 4T

Scope of delivery:


TIG accessories
TIG-Torch "SR-17" 4,5 Meter [Art.# SB2000-01]
CUT accessories
Plasma-Torch "PT-31" 4,50 Meter [Art.# SB2110-01]

Watertrap with gauge[Art.# ZC3150]
Gas-Hose: 3 m [Art.# ZO3450]
Ground cable 3 Meter [Art.# CA2350-01]
Electrode cable for STICK3 Meter [Art.# CA2300-01]

Datenblatt

Produktkatalog

Garantiebestimmungen

Bedienungsanleitung

This product consists of

CUT Accessories

Others

TIG Accessories

Other customers have also bought the following items

Related products