DC TIG welder 200A with plasma cutter 40A, MMA electrode, HF ignition, IGBT | CT520PD
Item number: K2031B

DC TIG welder 200A with plasma cutter 40A, MMA electrode, HF ignition, IGBT | CT520PD

Item number: K2031B
Not available now!
388,94 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 499,00 €
(You save 22.06%, that is 110,06 €)

VECTOR WELDING Welding device with plasma cutter CT520 PD

DC TIG 10-200A

HF ignition

MMA/electrode 10-170A

Hotstart, Arc Force, Anti Stick

IGBT

Note: Clutch valve not included in delivery

Produktdetails anzeigen
Welding equipment and plasma cutter CT520PD

Article number: K2031B

WELDING EQUIPMENT + PLASMA CUTTER CT520 PD

The CT520 PD from Vector Welding is a combined device for welding and plasma cutting.

with 200A in TIG mode, 170A in MMA/electrode mode and plasma cutting with 40 A at 100V the device is well suited for installation, repair, maintenance and DIY.

The 6.5kg light CT520 PD offers everything you need for metal welding or cutting.

CT520 PD PROPERTIES & ADVANTAGES:

  • 3in1 combi device: DC TIG, MMA/STICK, plasma cutting 

  • TIG welding: welding of almost all metals 

  • HF-ignition (TIG/CUT) 

  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.

  • Hot start: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.

  • Arc-Force: Melt off material is transferred to the workpiece more easily. Prevents the arc from going out if it is damaged by thisthis material causes contact between the electrode and the molten pool. 

  • Anti-stick: automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

  • Plasma cutter: CUT function with the help of a plasma beam generated by electricity. This beam melts the material and removes it with compressed air - a precise cut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)

  • Cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)

  • Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents 

  • Overheating protection

CT520 PD FEATURES:

TIG

CT520 PD TECHNICAL DETAILS:

setting range welding current (TIG mode)
10-200 A
setting range welding current (MMA/STICK mode)
10 -170 A
setting range welding current (CUT mode)
20 - 40 A
switch-on time (ED) TIG 40°C
200 A at 18 V 40%
switch-on time (ED) MMA/STICK 40°C
170 A at 26.8 V 25%
switch-on time (ED) Plasma cutter 40°C
40 A at 100 V 40%
mains voltage 1 x 230 Volt
mains frequency
50 - 60 Hz
protection class
IP23S
Dimensions in mm (L x W x H)
425 x 152 x 291
Weight in kg
6.5
Standards
EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)
12 mm
Quality cutting capacity (manually guided)
8 mm

CT520 PD CONTROLLER:

CT520PD System control
1. display display
4. amperage/amperes
7 cycle/ 4 cycle
2. hotstart/Arc Force
5. on/off
8. mode (TIG/MMA/CUT)
3. time/seconds
6. superheat display
9. parameter settings

CT520PD setting details
1. gas flow
5. REM=Remote/Remote control lamp
2. start current
6. current reduction
3. current rise
7. end current
4. welding current
8. gas after-run

CT520 PD TECHNISCHE DETAILS:

Einstellbereich Schweißstrom (WIG  Modus)
10-200 A
EInstellbereich Schweißstrom (MMA/STICK Modus)
10 -170 A
Einstellbereich Schweißstrom (CUT Modus)
20 - 40 A
Einschaltdauer (ED) WIG 40°C
200 A bei 18 V 40%
Einschaltdauer (ED) MMA/STICK 40°C
170 A bei 26.8 V 25%
Einschaltdauer (ED) Plasmaschneider 40°C
40 A bei 100 V 40%
Netzspannung
1 x 230 Volt
Netzfrequenz
50 - 60 Hz
Schutzart
IP23S
Maße in mm (L x B x H)
425 x 152 x 291
Gewicht in kg
6,5
Normen
EN60974-1 / EC60974-1
Maximale-Schnittkapazität (Hand geführt)
12 mm
Qualitäts-Schnittkapazität (Hand geführt)
8 mm

CT520 PD Scope of delivery:

CT520 DC TIG welder 200A with plasma cutter
TIG torch SR-17, 4m
WIG accessories package
Plasma torch PT31, 4m (incl. 1x nozzle, 1x electrode, 1x ceramic cap)
gas connection hose
Water cutter with manometer
welding cable with electrode holder 200A, 3m
ground cable, 3m
Contact