Item number:
M2205B1
WELDING MACHINE MIG 205A SET
The MIG 205A from
Vector Welding
is a MIG / MAG welder with
30-205A in MIG / MAG mode, 30-170A in MMA mode, and 10-180A in TIG mode
(optional).
The
MIG / MAG welding
process with its automatic wire feed is
suitable for many welding applications, even when working in
hard-to-reach places.
Complete welder SET
consisting of MIG MAG welding machine, welding helmet, 2x wire rolls
and 30-part accessories.
MIG
205A FEATURES &
BENEFITS:
MIG / MAG: welding with automatic wire feed . In MIG welding , argon (less often helium) is used as the shielding gas; this process is preferred for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas consisting of argon, CO2 and O2 as a protective gas and is mainly used for simple and low-alloy steel such as structural steel.
Settings according to wire size: If you set the wire size (0.6 | 0.8 | 1), a preset current (A) and wire feed speed, matched to the selected wire size, appears. The amperage can be changed within the specified range. Here amps are coupled to volts, the speed of the wire feed can be set separately.
In SPL mode (Separated Parameter Level) amps, volts and the speed of the wire feed can be set independently of each Other. A great advantage if an individual setting is desired. br>
Inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of increase in current so that the weld seam quality and precision is improved.
2 cycle / 4 cycle (MIG / MAG and TIG)
MMA / STICK / E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.
Hotstart: Each time the welding machine is restarted, overcurrent is provided and thus the ignition of the arc is supported.
Arc Force: Melted material is more easily transferred to the workpiece. Prevents the arc from being extinguished if this material makes contact between the electrode and the weld pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
DC-TIG welding ( optional : only possible with additional hose package and cables): welding of almost all metals
Lift Arc: Ignition occurs when there is contact with the workpiece, then the torch can be raised and the welding process starts with the selected parameters.
Modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
Overheating protection
MIG 205A FEATURES:
MIG
205A TECHNICAL DETAILS:
| Welding current setting
range (MIG / MAG mode) | 30-205 A. |
| Welding current setting
range (MMA / STICK mode) | 30-170 A |
| Welding current setting
range (TIG mode) | 10-200 A. |
| Duty cycle (ED) MIG / MAG
40 ° C | 205 A at 24V 35% |
| Duty cycle (ED) MMA / STICK
40 ° C | 170 A at 26.8V 35% |
| Duty cycle (ED) TIG 40
° C | 200 A at 17.2V 35% |
| Mains voltage | 1 x 230 volts |
| Grid frequency | 50-60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 391 x 153 x 282 |
| Weight in kg | 8th |
| Norms | EN60974-1 / IEC60974-1 |
MIG 205
TECHNICAL DETAILS:
| Setting range.
Welding;current (MIG mode) | 30 - 205 A |
| Setting range.
Welding;current (MMA/STICK mode) | 30 - 170 A |
| Setting range.
Welding;current (TIG mode) | 10 - 200 A |
| Duty cycle (ED) MIG.
40°C, 10 min | 205 A at 24V 35% |
| Duty cycle (ED) MMA/STICK
40°C, 10 min | 170 A at 26.8V 35% |
| Duty cycle (ED) TIG
40°C, 10 min | 200 A at 18V 35% |
| Mains voltage | 230V +/- 15% |
| Mains frequency | 50 - 60 Hz |
| Input current effective | 30A |
| Input current (max) | 50.7A |
| required design of the single-phase generator | 10 kVA |
| protection class | IP23 |
| Idle voltage (MIG/WIG/MMA) | 60V DC |
| Wire guide roller | 0.6/0.8/1 |
| Gas sequence (seconds) | 3 |
| Dimension in mm (L x W x H) | 391 x 153 x 282 |
| Weight in kg | 8 |
| Standards | EN60974-1 / IEC60974-1 |
MIG
205A Scope of delivery:
MIG / MAG welding machine MIG205A |
MIG / MAG welding wire steel ER70S 0.8mm - 1kg (D100 Role) |
MIG / MAG filler wire NoGas E7T 0.8mm - 1kg (D100 Role) |
Automatic welding helmet |
MIG / MAG & nbsp; accessories & nbsp; set (30 pieces) gas nozzles and current nozzles (0.8mm) |
MIG / MAG torch: MB-15 (Euro central connection), 3m |
Electrode pliers (9 mandrel), 3m |
Earth pliers with earth cable (9 mandrel), 3m |
Gas connection hose |
This product consists of
Automatic welding helmet Wig Tig Mma Mig Mag welding mask | Flames design
MIG MAG Schweißgerät 205A, MMA Elektrode 160A, IGBT, für 1kg Drahtrolle | MIG205A
MIG MAG welding wire Cored wire E71T-GS | 0.8 / 1 kg / D100 roll | NoGas
