Welding equipment SET MIG MAG welding helmet, flux cored wire, accessories | MIG255A VECTOR
Item number: M2255B1

Welding equipment SET MIG MAG welding helmet, flux cored wire, accessories | MIG255A VECTOR

Item number: M2255B1
Available now!

Shipping time: 2 - 3 workdays

469,99 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

Recommended retail price: 619,99 €
(You save 24.19%, that is 150,00 €)

VECTOR WELDING MIG/MAG welding device MIG 255A

MIG/MAG 30-255A

2 cycle/ 4 cycle

MMA/electrode 30-170A

IGBT

suitable: wire coils 5kg (D200) & 15kg (D300)

COMPLETE SET: Welding device, welding helmet, 5kg flux-cored wire and accessories

Note: Clutch valve and wire coil not included in the scope of delivery

 
Produktdetails anzeigen
Welding equipment Set MIG MAG 255A

Article number: M2255B1

WELDING EQUIPMENT SET MIG 255A

The lightweight MIG 255A from Vector Welding is a MIG/MAG welding equipment with 30-255A in MIG/MAG mode, 30-170A in MMA mode, and 10-200A in TIG mode (optional).

The MIG/MAGWelding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.

This set is a fully-equipped consisting of MIG MAG welding device MIG 255A, welding helmet in carbon-look, 5kg welding wire (wire roll), as well as an extensive accessory set (see scope of delivery)

MIG 255A PROPERTIES & ADVANTAGES:

  • MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.

  • Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. Here amperes are coupled to volts, the wire feed speed can be set separately.

  • In SPL Mode, amps, volts and wire feed speed can be set independently. This is a great advantage when an individual setting is required.

  • inductance: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and / or precision is improved wi

  • 2 cycles/4 cycles (MIG/MAG and TIG)

  • MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are the arc carrier and filler metal in one.

  • hot start: every time the welding machine is restarted, overcurrent is provided and thus supports the ignition of the arc.

  • Arc Force: Melted material is transferred more easily to the workpieceover. Prevents the arc from being extinguished if contact between the electrode and the molten pool is caused by this material.

  • anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.

  • DC TIG welding ( optional: only possible with additional hose package and cables): Welding of almost all metals

  • Lift Arc: The ignition is triggered by contact with the welding cablethe workpiece, then the torch can be lifted and the welding process starts with the selected parameters.

  • modern IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents

  • overheating protection

MIG 255A FEATURES:

Mig Mag 255a Funktionen

MIG 255A TECHNICAL DETAILS:

setting range welding current (MIG/MAG mode)
30 - 255 A
Adjustment range welding current (MMA/STICK mode)
30 - 170 A
Adjustment range welding current (TIG mode)
10 - 200 A
Duty cycle (ED) MIG/MAG 40°C
255 A at 25V 35%
Duty cycle (ED) MMA/STICK 40°C
170 A at 26.8V 35%
Duty cycle (ED) TIG 40°C
200 A at 18V 35%
Mains voltage
1 x 230 Volt
Mains frequency
50 - 60 Hz
Protection class
IP23
Dimensions in mm (L x W x H)
493 x 222 x 375
Weight in kg
11.5
Standards
EN60974-1 / IEC60974-1
wire diameter in mm
0.6/0.8/1

MIG 255A CONTROLLER:

Control Panel MIG 225A

1. On/Off
4. SWelding mode
7. 2 cycle/ 4 cycle
2. superheat display
5. display display display
8. selection of wire thickness
3. parameter setting
6. ampere/inductance/burn-back/volt

MIG 255A TECHNICAL DETAILS:

setting range welding current (MIG/MAG  mode)
30 - 255 A
setting range welding current (MMA/STICK mode)
30 - 170 A
setting range welding current (TIG mode)
10 - 200 A
duty cycle (ED) MIG/MAG 40°C
255 A at 25V 35%
duty cycle (ED) MMA/STICK 40°C
170 A at 26, 8V 35%
switch-on time (ED) TIG 40°C
200 A at 18V 35%
mains voltage
1 x 230 Volt
mains frequency
50 - 60 Hz
protection class
IP23
Dimensions in mm (L x W x H)
493 x 222 x 375
weight in kg
11, 5
standards
EN60974-1 / IEC60974-1
wire diameter in mm
0, 6/0.8/1

MIG 255 SET Scope of delivery:

MIG/MAG welding machine MIG 255
MIG/MAG torch: MB-15 (Euro central connection), 3m
Automatic welding helmet carbon-look
MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm)
MIG/MAG cored wire steel (copper plated) ER70S 0,8mm - 5kg (D200 roll)
electrode pliers (9 mandrel), 3m
ground clamp with ground cable (9 mandrel), 3m
gas connection hose

This product consists of

Other customers have also bought the following items