
Article
number: M2185B
WELDER MIG 185A
The MIG 185A from Vector Welding is a MIG/MAG
welder with 30-185A in MIG/MAG mode, 30-160A in MMA mode, and
10-180A in TIG mode (optional).
The MIG/MAG welding process with its automatic wire feed is suitable for many welding applications, even when working in hard-to-reach areas.
This
set is a full equipment consisting of MIG MAG
welding device MIG 185A, welding helmet, 2kg welding
wire (wire rolls), as well as a comprehensive accessory set (see scope
of delivery)
MIG
185A PROPERTIES & ADVANTAGES:
MIG/MAG: Welding with automatic wire feed. In MIG welding argon (more rarely helium) is used as shielding gas, this process is preferably used for non-ferrous metals and stainless steel. The MAG process uses CO2 or a mixed gas of argon, CO2 and O2 as shielding gas and is mainly used for simple and low-alloy steel such as mild steel.
-
Settings according to wire thickness: If you set the wire thickness (0.6 | 0.8 | 1), an ampere (A) and wire feed speed adapted to the selected wire thickness appears. The amperage can be changed within the given range. .
- In SPL Mode, amps and volts can be set independently. A higher volt slows the wire speed down. A lower volt accelerates the wire feed. This is a great advantage when an individual setting is required. With the help of the job memory the settings can be saved and easily reused at a later date.
inductivity: The device has a continuously adjustable choke. This smoothes the welding current and changes the rate of current rise so that the weld seam quality and /-pr∧ /- precision is improved.
2 cycle/4 cycle (MIG/MAG and TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hot start: every time the welding machine is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material is easier to removepasses more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be detached by hand without damaging the electrode clamp.
DC-TIG Welding (optional: only possible with additional hose package and cables): Welding of almost all metals
Lift Arc: The ignition etakes place on contact with the workpiece, then the torch can be lifted and the welding process starts with the selected parameters.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
setting range welding current
(MIG/MAG mode) | 30 - 185 A | |
setting range welding current (MMA/STICK mode) | 30 - 160 A | |
Adjustment range welding current
(TIG mode) | 10 - 180 A | |
Duty cycle (ED) MIG/MAG 40°C | 185 A at 23V 40% | |
Duty cycle (ED) MMA/STICK
40°C | 160 A at 26V 40% | |
Duty cycle (ED) TIG 40°C | 180 A at 17.2V 40% | |
Mains voltage | 1 x 230 Volt | |
Mains frequency | 50 - 60 Hz | |
Protection class | IP23 | |
Dimensions in mm (L x W x H) | 391 x 153 x 282 | |
Weight in kg | 8 | |
Standards | EN60974-1 / IEC60974-1 |
1. On/Off | 4. welding mode | 7. 2 cycle/ 4 cycle |
2. superheat indicator | 5. display indicator display | 8. wire thickness selection |
3. parametervalign="top">3.
parameter setting | 6. ampere/inductance/burn-back/volt |
|
MIG 185A TECHNICAL DETAILS:
setting range welding current (MIG/MAG mode) | 30 - 185 A |
setting range welding current (MMA/STICK mode) | 30 - 160 A |
setting range welding current (TIG mode) | 10 - 180 A |
duty cycle (ED) MIG/MAG 40°C | 185 A at 23V 40% |
duty cycle (ED) MMA/STICK 40°C | 160 A at 26V 40% |
duty cycle (ED) TIG 40°C | 180 A at 17, 2V 40% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
Protection class | IP23 |
Dimensions in mm (L x W x H) | 391 x 153 x 282 |
weight in kg | 8 |
standards | EN60974- 1 / IEC60974-1 |
MIG 185 SET Scope of delivery:
MIG/MAG welding machine 185 MIG |
MIG/MAG torch: MB-15 (Euro central connection), 3m |
Automatic welding helmet |
MIG/MAG accessories set (30 pieces) Gas nozzles and contact tips (0,8mm) |
MIG/MAG cored wire steel ER70S 0,8mm - 1kg (D100 roll) |
MIG/MAG cored wire NoGas E7T 0,8mm - 1kg (D100 roll) |
electrode pliers (9 mandrel), 3m |
ground clamp with ground cable (9 mandrel), 3m |
gas connection hose |