Article number: K1052SWIM2
WELDING EQUIPMENT + PLASMA CUTTER BERLIN 2400 SET
The BERLIN 2400 from Vector Welding is a combined device for welding and plasma cutting. With 200A in TIG mode, 170A in MMA mode and plasma cutting with 50 A at 96V the device is well suitedfor installation, repair, maintenance and do-it-yourself.
This set is a full equipment consisting of DC TIG welding device & Plasma cutter Berlin 2400, 2kg welding rod, tungsten electrodes, as well as an extensive accessories and wearing parts set (see scope of delivery).
BERLIN
2400 PROPERTIES & ADVANTAGES:
3in1 Combi-device: DC TIG, MMA/STICK, plasma cutting
DC TIG welding: welding of almost all metals
HF-ignition (TIG)
pulse function: during pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hot start: Each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if contact between the electrode and the molten pool is caused by this material.
Anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT FCUT function with the help of a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this procedure all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
contact ignition (CUT)
cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
9 memory locations for individual setting of the welding parameters.
BERLIN
2400 FEATURES:
BERLIN
2400 TECHNICAL DETAILS:
| setting range welding current (TIG
mode) | 10-200 A |
| setting range welding current
(MMA/STICK mode) | 10 -170 A |
| setting range welding current (CUT
mode) | 10 - 50 A |
| duration of operation (ED) TIG
40°C | 200 A at 18 V 40% |
| duration of operation (ED)
MMA/STICK 40°C | 170 A at 26.8 V 25% |
| duration of operation (ED) Plasma
cutter 40°C | 50 A at 96 V 40% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 380 x 160 x 405 |
| Weight in kg | 9.5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity
(hand-guided) | 12 mm |
| Quality cutting capacity
(hand-guided) | 8 mm |
BERLIN
2400 SYSTEM CONTROL:
| 1. power display/overheating display | 4. PULSE function | 7. hotstart/ARC Force/Anti Stick |
| 2. mode: MMA/WIG/Plasma | 5. +/- Tas+/- key | 8. JOB and SAVE |
| 3. 2 cycle/ 4 cycle | 6. display |
|
| 1. gas flow | 5. pulse current | 9. final current |
| 2. start current | 6. pulse width | 10. gas wake-up |
| 3. current rise | 7. pulse frequency | REM=Remote/remote control lamp |
| 4. welding current | 8. current reduction |
BERLIN
2400 TECHNICAL DETAILS:
| Welding current setting range (TIG
mode) | 10-200 A |
| Welding current setting range
(MMA/STICK mode) | 10 -170 A |
| Welding current setting range (CUT
mode) | 10 - 50 A |
| Welding current duty cycle (ED) TIG
40°C | 200 A at 18 V 4A at 18 V 40% |
| duration of operation (ED)
MMA/STICK 40°C | 170 A at 26.8 V 25% |
| duration of operation (ED) Plasma
cutter 40°C | 50 A at 96 V 40% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23 |
| dimensions in mm (L x W x H) | 380 x 160 x 405 |
| Weight in kg | 9.5 |
| standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity
(hand-guided) | 12 mm |
| Quality cutting capacity
(hand-guided) | 8 mm |
Berlin 2400 Scope of delivery:
| DC TIG welding machine and plasma cutter Berlin 2400 |
| WIG torch: WP-17 (9 mandrel, 5 pole), 4m |
| 1kg TIG welding rods stainless steel |
| 1kg TIG welding rods steel |
| 10x gas nozzles (2x per size 4,5,6,7,8) |
| 4x clamping sleeve housing (2x per size 1.6 and 2.4) |
| 4x clamping sleeves (2x per size 1.6 and 2.4) |
| 2x fire caps (1xlong/1xshort) |
| 10 pack tungsten electrodes (size 1,6 grey) |
| plasma torch: PT-31 (9 mandrel, 5 pole), 4m |
| plasma set for PT-31 (30 pieces) |
| electrode pliers (9 mandrel), 3m |
| ground clamp with ground cable (9 mandrel), 3m |
| water separator |
| gas connection hose |
This product consists of
DC TIG welder 200A with plasma cutter 50A, pulse inverter, MMA electrode 170A, HF ignition, IGBT | Berlin 2400
Tig Welding Filler Rods 1,6 mm Stainless Steel / TR 308 L SI
WIG-Schweißstäbe Stahl ER 70S-3 1,6mm
