VECTOR Berlin2400 Kombi Welder DC TIG 200 Plus CUT TIG MMA E-Hand Inverter 4 in1

dc-wig-puls-schweißgerät-mit-plasmaschneider-kombi-berlin2400-vector-welding_mma

dc-wig-puls-schweißgerät-mit-plasmaschneider-kombi-berlin2400-vector-welding_elektrode

Welding device SET DC TIG with plasma cutter Helmet Foot pedal Accessories | Berlin 2400

SKU: K1052SWIM1

GTIN: 4251210407226

Category: TIG-CUT Sets

Available immediately
Delivery time: 2 - 3 Workdays (in Germany)

589,00 € 659,00 €

incl. 19% VAT , (Standard)

VECTOR WELDING Welding device with plasma cutter Berlin 2400

DC TIG 10-200A

PULSE Function

HF-ignition

MMA/electrode 10-170A

Plasma cutter 50A (contact ignition)

IGBT & job memory

COMPLETT SET Welding device & plasma cutter with helmet, foot pedal and accessories

Article number: K1052SWIM1

WELDING EQUIPMENT + PLASMA CUTTER BERLIN 2400 SET

The BERLIN 2400 from Vector Welding is a combined device for welding and plasma cutting. With 200A in TIG mode, 170A in MMA mode and plasma cutting with 50 A at 96V the device is well suitedfor installation, repair, maintenance and do-it-yourself.

This set is a full equipment consisting of DC TIG welding device & plasma cutter Berlin 2400, welding helmet, a foot pedal for remote control of the welding current, 2kg welding rod, tungsten electrodes, as well as an extensive accessories and wearing parts set (see scope of delivery).

BERLIN 2400 PROPERTIES & ADVANTAGES:

3in1 Combi-device: DC TIG, MMA/STICK, plasma cutting
DC TIG welding: welding of almost all metals
HF-ignition (TIG)
pulse function: during pulse welding the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hot start: Each time the welding unit is restarted, overcurrent is provided to support the ignition of the arc.
Arc Force: Melted material transfers to the workpiece more easily. Prevents the arc from going out if contact between the electrode and the molten pool is caused by this material.
Anti-stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
Plasma cutter: CUT FCUT function with the help of a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. With this procedure all conductive metals can be cut (e.g. steel, stainless steel, aluminium, copper, etc.)
contact ignition (CUT)
cutting thickness: maximum 12mm (hand-guided), quality cut 8mm (hand-guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
9 memory locations for individual setting of the welding parameters.

BERLIN 2400 FEATURES:

BERLIN 2400 TECHNICAL DETAILS:

setting range welding current (TIG mode)	10-200 A
setting range welding current (MMA/STICK mode)	10 -170 A
setting range welding current (CUT mode)	10 - 50 A
duration of operation (ED) TIG 40°C	200 A at 18 V 40%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
duration of operation (ED) Plasma cutter 40°C	50 A at 96 V 40%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
Protection class	IP23
Dimensions in mm (L x W x H)	380 x 160 x 405
Weight in kg	9.5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	12 mm
Quality cutting capacity (hand-guided)	8 mm

BERLIN 2400 SYSTEM CONTROL:

1. power display/overheating display	4. PULSE function	7. hotstart/ARC Force/Anti Stick
2. mode: MMA/WIG/Plasma	5. +/- Tas+/- key	8. JOB and SAVE
3. 2 cycle/ 4 cycle	6. display

1. gas flow	5. pulse current	9. final current
2. start current	6. pulse width	10. gas wake-up
3. current rise	7. pulse frequency	REM=Remote/remote control lamp
4. welding current	8. current reduction

Shipping weight:	19,81 kg
Dimensions ( Length × Width × Height ):	79,00 × 60,00 × 40,00 cm

BERLIN 2400 TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	10 - 50 A
Welding current duty cycle (ED) TIG 40°C	200 A at 18 V 4A at 18 V 40%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
duration of operation (ED) Plasma cutter 40°C	50 A at 96 V 40%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
protection class	IP23
dimensions in mm (L x W x H)	380 x 160 x 405
Weight in kg	9.5
standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand-guided)	12 mm
Quality cutting capacity (hand-guided)	8 mm