Article number:
T2011B1
WELDING EQUIPMENT DC TIG 200D SET
The 200D from Vector Welding is a DC TIG welder with 200A in TIG mode and 170A in MMA (electrode) mode.
Thanks to IGBT the 200D has a high pulse load capacity and offers a precise and efficient TIG welding process.
The HF ignition and the necessary control, power and working capacity, makes it possible to carry out a wide range of professional welding jobs.
The lightweight 200D offers everything you need for metal welding.
This set is a full
equipment consisting of a DC TIG welding unit 200D, welding
helmet, a foot pedal for remote control of the welding
current, 2kg welding rod, tungsten electrodes, as well as a
comprehensive set of accessories and wearing parts (see scope of
delivery).
200D
PROPERTIES & ADVANTAGES:
DC-TIG welding: welding of almost all metals
HF ignition (TIG)
2 cycle/ 4 cycle
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hotstart: each time the welding unit is restarted, overcurrent is provided and then the welding process is restarted againthus supports the ignition of the arc.
Arc Force: Melted material transfers more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switchingSwitching electrical currents
overheating protection
200D
FEATURES:
200D TECHNICAL DETAILS:
| Adjustment range welding current
(TIG mode) | 10-200 A |
| Adjustment range welding current
(MMA/STICK mode) | 10 -170 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 35% |
| Duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8 V 35% |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 375 x 153 x 287 |
| Weight in kg | 6.2 |
| Standards | EN60974-1 / IEC60974-1 |
200D
CONTROL PANEL:
| 1. display | 4. amperage/amperes | 7. 2 cycle/ 4 cycle |
| 2. hotstart/Arc Force | 5. on/off | 8. mode (TIG/MMA) |
| 3. time/seconds | 6. superheat display | 9. parameter settings |
| 1. gas flow | 5. REM=Remote/Remote control light |
| 2. start current | 6. current reduction |
| 3. current rise | 7. final current |
| 4. welding current | 8. gas wake-up |
200D TECHNICAL DETAILS:
| setting range welding current (TIG mode) | 10-200 A |
| adjustment range welding current (MMA/STICK mode) | 10 - 170 A |
| switch-on time (ED) TIG 40°C | 200 A at 18 V 35% |
| switch-on time (ED) MMA/STICK 40°C | 170 A at 26, 8 V 35% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| Dimensions in mm (L x W x H) | 375 x 153 x 287 |
| weight in kg | 6, 2 |
| standards | EN60974-1 / IEC60974-1 |
200 D Scope of delivery:
| DC TIG welding unit 200D |
| Automatic welding helmet |
| foot pedal remote control |
| WIG torch: WP 17 (9 mandrel, 5 pole), 4m with gas quick-acting closure |
| 1kg TIG welding rods stainless steel |
| 1kg TIG welding rods steel |
| 10x gas nozzles (2x per size 4,5,6,7,8) |
| 4x clamping sleeve housing (2x per size 1.6 and 2.4) |
| 4x clamping sleeves (2x per size 1.6 and 2.4) |
| 2x fire caps (1xlong/1xshort) |
| 10 pack tungsten electrodes (size 1,6 grey) |
| gas connection hose |
| electrode pliers 200A (9 mandrel), 3m |
| ground clamp with ground cable (9 mandrel), 3m |
This product consists of
Automatik Schweisshelm Wig Tig Mma Mig Mag Schweissmaske Schweissschirm
Welder DC TIG IGBT HF 200A MMA Inverter | 200D
Tig Welding Filler Rods 1,6 mm Stainless Steel / TR 308 L SI
WIG-Schweißstäbe Stahl ER 70S-3 1,6mm
Tungsten electrodes WC 20 Grey 1,6 X175mm (10 Pcs)
