AC/DC TIG PLASMA 200 D + plasma cutter SET | VECTOR WELDING - Welding devices and plasma cutters from the manufacturer Vector Weld

Welding device SET AC/DC TIG + plasma cutter MMA welding rods, tungsten electrods, accessories | TIG Plasma 200 D

Item number: K2001B2

Welding equipment and plasma cutter 200D Set

Article number: K2001B2

WELDING EQUIPMENT + PLASMA CUTTER 200D Set

The AC/DC TIG PLASMA 200D from Vector Welding is a combined device for welding and plasma cutting.

With 10-200A in TIG mode, 10-170A in MMA/electrodesMode and plasma cutting with 10-50A the device is well suited for installation, repair, maintenance and DIY. It processes all weldable metals, including aluminium.

This article is a complete set including welding device with plasma cutter, tungsten electrodes, 3kg welding rods as well as an extensive accessory set.

200 D PROPERTIES & ADVANTAGES:

3in1 combi-device: AC/DC TIG, MMA/STICK, plasma cutting
AC/DC-TIG welding: Processing of all weldable metals, including aluminium
HF-ignition (TIG/CUT)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
hotstart: each time the welding device is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc-Force: melted material gMaterial transfers more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
anti-stick: Switches the welding generator off automatically if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
plasma cutter: CUT function using a plasma beam generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. This process can be used to cut all conductive metals (e.g. steel, stainless steel, aluminium, copper, etc.)
Cut thickness: maximum 12mm (hand-guided), Quality cut 8mm (hand-guided)
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents

200 D FEATURES:

200 D TECHNICAL DETAILS:

setting range welding current (TIG mode)	10-200 A
setting range welding current (MMA/STICK mode)	10 -170 A
setting range welding current (CUT mode)	10 - 50 A
duration of operation (ED) TIG 40°C	200 A at 18 V 40%
duration of operation (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
duration of operation (ED) Plasma cutter 40°C	50 A at 100 V 40%
mains voltage	1 x 230 Volt
mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	9.5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)	12 mm
Quality cutting capacity (manually guided)	8 mm

200 D CONTROLLER:

1. display display	6. current (A)	11. 2 clock/ 4 clock
2. hotstart/Arc Force	7. %-choice	12. mode (MMA/WIG/CUT)
3. AC/DC mode	8. frequency (Hz)	13. parameter settings
4. setting controller	9. on/off
5. time (seconds)	10. superheat indicator

1. gas flow	5. REM=Remote/Remote control lamp	9. AC frequency
2. start current	6. current reduction	10. AC balance
3. current rise	7. end current	7. end current
4. welding current	8. gas afterflow

200 D TECHNISCHE DETAILS:

Adjustment range welding current (TIG)	10-200 A
Adjustment range welding current (MMA/Elektrode)	10 -170 A
Setting range welding current (CUT mode)	10 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40%
Input Voltage	1 x 230 Volt
Power frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight (kg)	9,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)	12 mm
Quality cutting capacity (hand guided)	8 mm