Item number:K1052SWIM
WELDER+ PLASMA CUTTER BERLIN 2400
The BERLIN 2400 from Vector Welding is a combination unit for welding and plasma cutting. With 200A in TIG mode, 170A in MMA mode and plasma cutting at 50Abei96V, it is well suited for installation, repair, maintenance and DIY.
The BERLIN 2400 offers everything you need for metal welding or cutting. Easy to use and fully functional, the control panel allows you to quickly set and save all the necessary parameters.
BERLIN2400 FEATURES & BENEFITS:
-
3in1 combination unit: DC TIG, MMA/STICK,Plasma cutting
-
DC TIG welding: welding of almost all metals
-
HF ignition (TIG)
-
Pulse function: in pulse welding, the welding current alternates between output and peak current at the desired frequency. The longer the intervals, the less energy and heat is supplied to the workpiece
-
MMA/STICK/E-HAND: coated electrodes are used - in this process, the electrodes are arc carriers and filler metal in one.
-
Hotstart: overcurrent is provided each time the welder is restarted, thus supporting the ignition of the arc.
-
Arc Force: molten material is more easily transferred to the workpiece, preventing the arc from being extinguished if this material causes contact between the electrode and the molten pool.
-
Anti-stick automatically shuts off the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
-
Plasma cutter: CUT function by means of a plasma jet generated by electricity. This melts the material and removes it with compressed air - a precise cut is produced. This method can be used to cut all conductive metals (e.g. steel, stainless steel, aluminum, copper, etc.).
-
Contact ignition (CUT)
-
Cut thickness: maximum 12mm (hand guided),quality cut 8mm (hand guided)
-
advanced IGBT(InsulatedGate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
-
Overheating protection
-
9Memory locations for individual setting of welding parameters.
BERLIN2400 FEATURES:
BERLIN2400 TECHNICAL DETAILS:
| Setting rangeWelding current (TIG mode) | 10-200 A |
| Welding current setting range (MMA/STICK mode) | 10 -170 A |
| Welding current setting range (CUT mode) | 10 - 50 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK40°C | 170 A at 26.8 V 25% |
| Duty cycle (ED) Plasma cutter40°C | 50 A at 96 V 40% |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23 |
| Dimensions in mm (L x W x H) | 380 x 160 x 405 |
| Weight in kg | 9,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity(hand guided) | 12 mm |
| Quality cutting capacity(Hand guided) | 8 mm |
BERLIN2400 SYSTEM CONTROL:
| 1.power indicator/overheat indicator | 4. PULSE function | 7. hot start/ARC force/anti stick |
| 2. mode: MMA/WIG/Plasma | 5. +/- Button | 8. JOB and SAVE |
| 3. 2 bar/ 4 bar | 6. display |
|
| 1. gas advance | 5. pulse current | 9. final current |
| 2. start current | 6. pulse width | 10. gas overrun |
| 3. current rise | 7. pulse frequency | REM=Remote/Remote control light |
| 4. welding current | 8. current reduction |
|
| Shipping weight: | 22,01 kg |
| Dimensions ( Length × Width × Height ): | 79,00 × 60,00 × 40,00 cm |
BERLIN
2400 TECHNICAL DETAILS:
| Welding current setting range (TIG
mode) |
10-200 A |
| Welding current setting range
(MMA/STICK mode) |
10 -170 A |
| Welding current setting range (CUT
mode) |
10 - 50 A |
| Welding current duty cycle (ED) TIG
40°C |
200 A at 18 V 4A at 18 V 40% |
| duration of operation (ED)
MMA/STICK 40°C |
170 A at 26.8 V 25% |
| duration of operation (ED) Plasma
cutter 40°C |
50 A at 96 V 40% |
| mains voltage |
1 x 230 Volt |
| mains frequency |
50 - 60 Hz |
| protection class |
IP23 |
| dimensions in mm (L x W x H) |
380 x 160 x 405 |
| Weight in kg |
9.5 |
| standards |
EN60974-1 / EC60974-1 |
| Maximum cutting capacity
(hand-guided) |
12 mm |
| Quality cutting capacity
(hand-guided) |
8 mm |
- Welding & Plasma Cutter Combination Unit
- TIG torch: WP-17 (9 mandrel, 5 pole), 4m
- Plasma torch: PT-31 (9 mandrel, 5 pole), 4m
- Automatic welding helmet
- Protective gloves
- Arm splash protection
- Welding apron
- Kevlar finger protection
- Electrode holder Belt pouch
- 1kg TIG welding rods stainless steel
- 1kg TIG welding rods steel
- 10x tungsten electrodes (size 1,6 grey)
- Gas connection hose
- Electrode pliers 200A (9 mandrel), 3m cable
- Ground tongs (9 mandrel), 3m cable
- TIG-wear parts-SET 20 pieces
- Plasma wear parts-SET 30 pieces
