dc-wig-welder-with-plasmacutter-combi-cct520pd-vector-welding

dc-wig-welding-machine-with-plasma-cutter-combi-cct520pd-vector-welding_inverter

dc-wig-welding-device-with-plasma-cutter-combi-cct520pd-vector-welding_electrode

Welder SET: DC TIG with plasma cutter IGBT inverter foot pedal pressure reducer welding magnets welding torch holder | CT520PD

SKU: K2031BSET5
GTIN: 4251210409688
Category: Welding machines
Manufacturers: VECTOR WELDING

Welder SET: DC TIG with plasma cutter IGBT inverter foot pedal pressure reducer welding magnets welding torch holder | CT520PD

VECTOR WELDING welder with plasma cutter CT520 PD

DC TIG 10-200A

HF ignition

MMA/Electrode 10-170A

Plasma cutting 20-40A

IGBT

SET including welder, welding rods, foot pedal, pressure reducer

559,00 €

incl. 19% VAT , (Standard)

Currently out of stock

Wählen Sie eine Variation aus: CT 520PD SET Druckabschneider & Zubehör: 449,00 €

489,00 €

549,00 €

589,00 €

559,00 €

689,00 €

Contact data

E-Mail

Item number:K2031B

WELDER+ PLASMA CUTTER CT520 PD

The CT520PD from Vector Welding is a combination welder and plasma cutter.

With 200A in TIG mode, 170A in MMA/electrode mode and plasma cutting at 40A at 100V, the unit is well suited for installation, repair, maintenance and DIY.

The 6.5kg CT520 PD has everything you need for metal welding or cutting.

CT520PD FEATURES & BENEFITS:

3in1 Combi Unit: DC TIG,MMA/STICK, Plasma Cutting.
DC TIG welding:Welding of almost all metals
HF ignition (TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart: overcurrent is provided each time the welder is restarted, helping to ignite the arc.
Arc-Force: molten material is more easily transferred to the workpiece. Prevents the arc from being extinguished when this material causes contact between the electrode and the molten pool.
Anti-stick: automatically switches off the welding generator if the electrode sticks to the workpiece and must be removed manually without damaging the electrode clamp.
Plasma cutter: CUT function with the help of a plasma jet generated by current. This melts the material and removes it with compressed air - a precise cut is produced. All conductive metals can be cut with this method (e.g. steel, stainless steel, aluminum, copper, etc.).
cutting thickness: maximum 12mm(hand guided), quality cut 8mm (hand guided)
modern IGBT (InsulatedGate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
overheating protection

CT520PD FEATURES:

CT520PD TECHNICAL DETAILS:

Setting rangeWelding current (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	20 - 40 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter40°C	40 A at 100 V 40%
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	6,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity(hand guided)	12 mm
Quality cutting capacity(Hand guided)	8 mm

CT520PD CONTROL PANEL:

1. display screen	4. current/ampere	7. 2 clock/ 4 clock
2. hot start/arc force	5. on/off	8. mode (TIG/MMA/CUT)
3. time/seconds	6. overheat indicator	9. parameter settings

1. gas advance	5th REM=remote/remote control light
2. start current	6. current reduction
3. current increase	7.closing current
4.welding current	8. gas overrun

Shipping weight:	18,46 kg
Dimensions ( Length × Width × Height ):	79,00 × 60,00 × 40,00 cm

CT520 PD TECHNICAL DETAILS:

duty cycle (ED) MMA / STICK 40 ° C

Welding current setting range (TIG & nbsp; mode)	10-200 A
Welding current setting range (MMA / STICK mode)	10 -170 A
Welding current setting range (CUT mode)	20 - 40 A
duty cycle (ED) TIG 40 ° C	200 A at 18 V 40%
170 A at 26.8 V 25%
Duty cycle (ED) plasma cutter 40 ° C	40 A at 100 V 40%
Mains voltage	1 x 230 volts
Mains frequency	50 - 60 Hz
Degree of protection	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	6.5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (Hand guided)	12 mm
Quality cutting capacity (hand guided)	8 mm