
Article
number: T2001B2
WELDING EQUIPMENT SET AC/DC TIG 200D
The
AC / DC TIG welder 200D from Vector Welding is
based on the digital system. It offers a precise, professional AC/DC
TIG welding process.
With
the 200D it is possible to weld all
weldableThe device works with 10-200A in TIG mode
and 10-170A in MMA/electode/stick mode.
Easy operation and full functions: All necessary controls for DC, AC TIG welding with HF ignition or MMA/electrode welding with contact ignition can be quickly set via the control panel.
This
article is a complete set
consisting of welding device, tungsten
electrodes, 3kg welding rod and accessories (for details see scope
of delivery).
AC/DC
200D PROPERTIES & ADVANTAGES:
AC/DC TIG: welding of all weldable metals including aluminium
The adjustable AC output frequency allows the operator to focus the arc to minimize the heat-affected zone.
The advanced AC balance control helps to keep a pointed tungsten needleTungsten needle er obtained to precisely control the arc in the welding joint.
continuous output control: Focus the arc for different material thicknesses: 200A at 40% (TIG) and 170A at 25% (MMA).
2 cycle/ 4 cycle
MMA/electrodes/stick: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hot Start: at anyeach time the welding generator is restarted, overcurrent is supplied to support the ignition of the arc.
Arc-Force: Melted material transfers more easily to the workpiece. Prevents the arc from going out if contact between the electrode and the molten pool is established by this material.
Anti-Stick: automatically switches off the welding generator if the electrode sticks to the workpiece and has to be detached by hand without damaging the electrode clamp.
AC/DC
200D FEATURES:
AC/DC
200D TECHNICAL DETAILS:
setting range welding current (WIG) | 10 -200 A |
adjustment range welding current
(MMA/electrode) | 10 -170 A |
duty cycle (ED) TIG 20°C | 200 A at 18V 40% |
duty cycle (ED) MMA 20°C | 170 A at 26.8V 25% |
mains voltage | 1 x 230 Volt |
mains frequency | 50 - 60 Hz |
Protection class | IP23S |
Dimensions in mm (L x W x H) | 425 x 152 x 291 |
Weight in kg | 8.7 |
Standards | EN 60974-1 / IEC 60974-1 |
Cooling | Fan cooled |
Welding type | Welding type Inverter power source |
1. display display display | 6. current strength (A) | 11. 2 clock/ 4 clock |
2. hotstart/Arc Force | 7. %-choice | 12. mode: MMA or TIG |
3. AC/DC mode | 8. frequency (Hz) | 13. setting details |
4. function selection | 9. on/off | |
5. time (seconds) | 10. superheat indicator | |
AC/DC 200D ONSETTING DETAILS:
1. gas flow | 5. remote/remote control light | 9. AC frequency (50-200 Hz) |
2. start current | 6. current reduction | 10. AC
balance (10-30%) |
3. current rise | 7. final current |
|
4. primary current | 8. gas lag |
|
AC/DC 200D TECHNICAL DETAILS:
Adjustment range welding current (TIG) | 10 -200 A |
Adjustment range welding current (MMA/Electrode) | 10 -170 A |
Duty cycle TIG 20°C | 200 A at 18V 40% |
Duty cycle MMA 20°C | 170 A at 26,8V 25% |
Input Voltage | 1 x 230 Volt |
Power frequency | 50 - 60 Hz |
Protection class | IP23S |
Dimensions in mm (L x W x H) | 425 x 152 x 291 |
Weight (kg) | 8,7 |
Standards | EN 60974-1 / IEC 60974-1 |
Cooling | Fan cooled |
Welder type | Inverter power source |
200 D
Scope of delivery:
AC/DC TIG 200D welding machine |
WIG torch: WP 17 (9
mandrel, 5 pole), 4m with gas quick-acting closure |
1kg TIG welding rods aluminium |
1kg TIG welding rods stainless steel |
1kg TIG welding rods steel |
10x gas nozzles (2x per size
4,5,6,7,8) |
4x clamping sleeve housing (2x per
size 1.6 and 2.4) |
4x clamping sleeves (2x per size
1.6 and 2.4) |
2x fire caps (1xlong/1xshort) |
10x tungsten electrodes (size
1,6 grey) |
gas connection hose |
electrode pliers 200A (9 mandrel),
3m |
ground clamp with ground cable (9
mandrel), 3m |