acdc-wig-plasmaschneider-3in1-200d-inverter-welder-alu-mma-stick-elektrode-ehand-vector-welding

acdc-wig-plasmaschneider-3in1-200d-inverter-welder-alu-mma-stick-elektrode-vector-welding

acdc-wig-plasmaschneider-3in1-200d-inverter-welder-alu-mma-elektrode-ehand-vector-welding

Welder SET AC/DC TIG + plasma cutter MMA foot pedal pressure reducer welding magnets welding torch holder | TIG Plasma 200 D

SKU: K2001BSET5
GTIN: 4251210409640
Category: Welding machines
Manufacturers: VECTOR WELDING

Welder SET AC/DC TIG + plasma cutter MMA foot pedal pressure reducer welding magnets welding torch holder | TIG Plasma 200 D

VECTOR WELDING AC/DC TIG welder with plasma cutter 200D

AC/DC TIG 10-200A

HF ignition (TIG)

MMA/electrode 10-170A

plasma cutter 50A

IGBT

SET including welder, welding rods, foot pedal, pressure reducer

769,00 €

incl. 19% VAT , (Standard)

Currently out of stock

Wählen Sie eine Variation aus: AC/DC PLASMA WIG 200D SET Druckabschneider & Zubehör: 649,00 €

699,00 €

759,00 €

789,00 €

769,00 €

909,00 €

Contact data

E-Mail

Item number: K2001B

WELDER + PLASMA CUTTER 200D

The AC/DC TIG PLASMA 200D from Vector Welding is a combination unit for welding and plasma cutting.

With 10-200A in TIG mode, 10-170A in MMA/electrode mode and plasma cutting at 10-50A, the unit is well suited for installation, repair, maintenance and DIY.

The lightweight 200D has everything they need for metal welding or cutting jobs. It handles all weldable metals, including aluminum .

200 D FEATURES & BENEFITS:

3in1 combination unit: AC/DC TIG, MMA/STICK, plasma cutting.
AC/DC TIG welding: processes all weldable metals, including aluminum
HF ignition (TIG)
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart: overcurrent is provided each time the welder is restarted, helping to ignite the arc.
Arc-Force: molten material is more easily transferred to the workpiece. Prevents the arc from being extinguished if this material causes contact between the electrode and the molten pool.
Anti-stick: automatically shuts down the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
Plasma Cutter: CUT function using a plasma jet generated by electricity. This melts the material and carries it away with compressed air, creating a precise cut. All conductive metals can be cut with this method (e.g. steel, stainless steel, aluminum, copper, etc.).
cutting thickness: maximum 12mm (hand guided), quality cut 8mm (hand guided)
advanced IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents

200 D FEATURES:

200 D TECHNICAL DETAILS:

Welding current setting range (TIG mode)	10-200 A
Welding current setting range (MMA/STICK mode)	10 -170 A
Welding current setting range (CUT mode)	10 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40% duty cycle
Mains voltage	1 x 230 Volt
Mains frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight in kg	9,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (hand guided)	12 mm
Quality cutting capacity (hand guided)	8 mm

200 D SYSTEM CONTROL:

1. display	6. amperage (A)	11. 2 stroke/ 4 stroke
2. hotstart/arc force	7. % selection	12. mode (MMA/WIG/CUT)
3. AC/DC mode	8. frequency (Hz)	13. parameter settings
4. setting knob	9. on/off
5. time (seconds)	10. overheating indicator

1. gas advance	5. REM=remote/remote control light	9. AC frequency
2. start current	6. current reduction	10. AC Balance
3. current increase	7. final current
4. welding current	8. gas overrun

Shipping weight:	25,06 kg
Dimensions ( Length × Width × Height ):	79,00 × 60,00 × 40,00 cm

200 D TECHNISCHE DETAILS:

Adjustment range welding current (TIG)	10-200 A
Adjustment range welding current (MMA/Elektrode)	10 -170 A
Setting range welding current (CUT mode)	10 - 50 A
Duty cycle (ED) TIG 40°C	200 A at 18 V 40%
Duty cycle (ED) MMA/STICK 40°C	170 A at 26.8 V 25%
Duty cycle (ED) Plasma cutter 40°C	50 A at 100 V 40%
Input Voltage	1 x 230 Volt
Power frequency	50 - 60 Hz
Protection class	IP23S
Dimensions in mm (L x W x H)	425 x 152 x 291
Weight (kg)	9,5
Standards	EN60974-1 / EC60974-1
Maximum cutting capacity (manually guided)	12 mm
Quality cutting capacity (hand guided)	8 mm