Item number:
T2011B
WELDER DC TIG 200D
The 200D from Vector Welding is a DC TIG
welder with 200A in TIG mode and 170A in
MMA (electrode) mode.
Thanks to IGBT the 200D
has a high pulse load capacity and offers a precise and efficient TIG
welding process.
The HF ignition and the necessary control,
power and working capacity, enablesit to carry out a wide range of
professional welding work. the light 200D offers
everything you need for metal welding.
200D
PROPERTIES & ADVANTAGES:
DC-WIG welding: welding of almost all metals
HF ignition (TIG)
2 cycle/ 4 cycle
MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
Hotstart: every time the welding unit is restarted, overcurrent is provided and thus supports the ignition of the arc.
Arc Force: Melted material transfers more easily to the workpiece. Prevents the arc from going out if this material causes contact between the electrode and the molten pool.
Anti-Stick automatically switches off the welding generator if the electrode sticks to the workpiece and has to be removed by hand without damaging the electrode clamp.
modern IGBT (Insulated Gate Bipolar Transistor) enables fast and therefore low-loss switching of electrical currents
overheating protection
200D
FEATURES:
200D
TECHNICAL DETAILS:
| adjustment range
Welding current (TIG mode) | 10-200 A |
| adjustment range
Welding current (MMA/STICK mode) | 10 -170 A |
| switch-on time (ED) TIG 40°C | 200 A at 18 V 35% |
| duty cycle (ED) MMA/STICK
40°C | 170 A at 26.8 V 35% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| dimensions in mm (L x W x H) | 375 x 153 x 287 |
| weight in kg | 6.2 |
| standards | EN60974-1 / IEC60974-1 |
200D
CONTROLLER:
| 1. display display indication | 4. amperage/amperes | 7. 2 cycle/ 4 cycle |
| 2. hotstart/Arc Force | 5. on/off | 8. mode (TIG/MMA) |
| 3. time/seconds | 6. superheat display | 9. parameter settings |
| 1. gas flow | 5. REM=Remote/Remote control lamp |
| 2. start current | 6. current reduction |
| 3. current rise | 7. final current |
| 4. sweatWelding current | 8. gas after-run |
200D TECHNICAL DETAILS:
| setting range welding current (TIG mode) | 10-200 A |
| adjustment range welding current (MMA/STICK mode) | 10 - 170 A |
| switch-on time (ED) TIG 40°C | 200 A at 18 V 35% |
| switch-on time (ED) MMA/STICK 40°C | 170 A at 26, 8 V 35% |
| mains voltage | 1 x 230 Volt |
| mains frequency | 50 - 60 Hz |
| protection class | IP23S |
| Dimensions in mm (L x W x H) | 375 x 153 x 287 |
| weight in kg | 6, 2 |
| standards | EN60974-1 / IEC60974-1 |
200 D Scope of delivery:
| DC TIG welding unit 200D |
| WIG_torch: WP 17 (gas/electricity combined connection), 4m |
| WIG Set 14 pieces |
| gas connection hose |
| electrode pliers 200A (9 mandrel), 3m |
| ground clamp with ground cable (9 mandrel), 3m |
