VECTOR Digital Welding machine AC/DC TIG O251 Plus Inverter ALU TIG CUT ARC MMA STICK Electrode

Item number: T1041VD


starting from 1.849,00 €

including 19% VAT., no shipping costs to: DE , shipping (Standard)

(Net: 1.553,78 €)
Recommended retail price: 1.949,00 €
(You save 5.13%, that is 100,00 €)

Available now!
Our Vector Digital welding machine and plasma cutter combi device for challenging tasks. AC/DC, WIG 200 A, Puls, MMA, CUT O 251. AC/DC, TIG 200 A, TIG Puls, MMA/STICK 200 A, CUT Kontakt, IGBT (Infineon)

Category: AC/DC TIG + CUT Welder with Plasmacutter


WP-26 TIG- Welding torch 200A

WP-26 TIG- Welding torch 200A ( 4,5 M / 8 M ) the welding torch is always equipped according to the diameter of the tungsten electrode

WP-26 TIG- Welding torch 200A
WIG Zubehör Sets
WIG Zubehör Sets
  • This set contains:

    - 4 gas nozzles (size 4, 5, 6, 7)
    - 4 clamping sleeves (2 each in sizes 1.6 and 2.4)
    - 4 clamping sleeve housings (2 each in sizes 1.6 and 2.4)
    - 1 short burner cap
    - 1 long burner cap
  • This set contains:

    - 10 clamping sleeves for TIG welding torch - 1.6 - 10N23
    - 10 clamping sleeve housing for TIG welding torch - 1.6 - 10N31
    - 2 gas nozzles for TIG welding torches - size 4 - 10N50
    - 2 gas nozzles for WIG welding torches - size 6 - 10N48
    - 2 gas nozzles for TIG welding torches - size 7 - 10N47
    - 2 gas nozzles for TIG welding torches - size 8 - 10N46
    - 10 tungsten electrodes 175mm size 1,6 WC 20 gray
  • This set contains:

    - 20 clamping sleeves for TIG welding torch - 1.6 - 10N23
    - 20 clamping sleeves for TIG welding torch - 2,4 - 10N24
    - 20 clamping sleeve housing for TIG welding torch - 1.6 - 10N31
    - 20 clamping sleeve housing for TIG welding torch - 2,4 - 10N32
    - 10 gas nozzles for TIG welding torches - size 4 - 10N50
    - 10 gas nozzles for TIG welding torches - size 5 - 10N49
    - 10 gas nozzles for TIG welding torches - size 6 - 10N48
    - 10 gas nozzles for TIG welding torches - size 7 - 10N47
    - 10 gas nozzles for TIG welding torches - size 8 - 10N46
    - 10 tungsten electrodes 175mm size 1,6 WC 20 gray
    - 10 tungsten electrodes 175mm size 2,4 WC 20 gray
AG-60 Plasma Schweißbrenner
AG-60 Plasma Schweißbrenner
Plasma Zubehör Sets AG-60
Plasma Zubehör Sets AG-60
Massezange
Massezange
  • Massezange Länge 3 m 25 mm² / 300 A Dorn 13 mm
  • Massezange Länge 5 m 25 mm² / 300 A Dorn 13 mm
Elektrodenzange
Elektrodenzange
  • Elektrodenzange Länge 3 m 25 mm² / 300 A Dorn 13 mm
  • Elektrodenzange Länge 5 m 25 mm² / 300 A Dorn 13 mm
Zubehör
Zubehör
  • Optimal and safe protection thanks to automatic darkening when the arc appears.
  • The set includes: welding gloves, protective sleeves, welding apron
  • Universally applicable to any german gas cylinder
  • ohne
Your configuration




Description

 

MULTIFUNCTION / O251

Quick
specs

Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
Maintenance and Repair
Pipe welding outside
Auto Body
Light Industry
Process:
DC TIG (GTAW)
AC TIG (GTAW)
Stick (MMA)
Plasma Cutting
Input Power: 230V, 1-Phase
Amperage Range: 10-200A
Rated Output at40 C (104 F):
MMA:200A at 28V @60% Duty Cycle
TIG: 200A at 18V @60% Duty Cycle
CUT: 40A at 96V @60% Duty Cycle
Weight: 31KG
 
For TIG and Stick Welding
  A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine  
O251 built base on the Mastertig System offers precise, expert AC/DC TIG welding process. It?s a precise aluminum welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs.
O251 also comes with a 50A@60 heavy duty cycle plasma cutting power source. What you need for any metal welding or cutting works, you just get this combo machine and it?s all you needs. For TIG and Stick Welding
Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels.
Specialist Features
  Precision Arc Performance:  
DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Lift-Arc start provides AC or DC arc starting without the use of high frequency.
Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone
Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
Pilot Arc for superior arc performance and easy start.
HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
Continuous Output Control: focus the arc for different material thickness.
Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
Powerful with heavy duty: 200A @50%.
10 channels memory capacity
 
  Outstanding Quality:  
 Newly designed using the latest power electronic technology for improved reliability.
 CE Certified.
    3 Years Warranty on parts , 5 Years Warranty on Transformer
 
  Technical specifications
 
  Description VECTOR DIGITAL O251 MULTIFUNCTION
  Weight 31 kg
  Power Source Dimensions L540mmxW270mmxH450mm
  Cooling Fan Cooled
  Welder Type Inverter Power Source
  European Standards EN 60974-1 / IEC 60974-1
  Number of Phases 1
  Nominal Supply Voltage 230V +/- 15%
  Nominal Supply Frequency 50/60Hz
 Welding Current Range ( STICK Mode) 10 - 200A
Welding Current Range ( TIG Mode) 10 - 200A
Welding Current Range (CUT Mode) 10 - 40A
Effective Input Current /STICK /TIG 20.8A
Maximum Input Current/STICK/ TIG 41.6A
Single Phase Generator Requirement 12.1KVA
  STICK (MMA) Welding Output, 40oC, 10 min. 200A @ 25%, 28V
141A @ 50%, 25.6V
110A @ 100%, 24.4V
  TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 25%, 18V
141A @ 50%, 15.6V
110A @ 100%, 14.4V
  Welding Output, 40oC, 10 min. 40A @ 60%, 96V
31A @ 100%, 92.4V
  Open circuit voltage 70.0-80.0V DC
  Protection Class IP23S
 
  CUT PERFORMANCE - MILD STEEL
 
Big cutting power in a small package - the
industry's most portable and powerful 40-amp
plasma cutter offers 10mm. mild steel cutting.
The unit offers easy connection to 115V or 230V
input with Auto-Line technology and MVP Adapters.
 
  General View of Control Panel
 
 
Control Panel Parameter Values
1. RESET buttonr
2. Pulse Button
3. Trigger Mode Control Button
4. Process Selection Button
5. Digital Ammeter
6. Digital Voltmeter / Parameter meter

7. Power ON Indicator
8. Thermal Overload Indicator
9. JOB and SAVE
10. Programming Parameter
Indicators
11. Purge Button

12. Mode Button
14. Back Programming Button
15. Positive Control
16. Negative Control
 
  General View of Contrl Panel(Continued)
 
Item   Symbol   Description
1   Gas Pre-Flow   Absolute setting range 0.1s to 20s (0.1S increments)
2   Initial Current   The main current Setting range 10AMP to 100AMP
3   Up Slope   Setting ranges :0.1S-10S (0.1S increments)
4   Peak Current   Setting ranges
  10AMP to 200AMP (DC TIG mode), 10 to 200A (AC HF TIG mode)
5   Base Current   Setting ranges
  10AMP to 200AMP (DC TIG mode), 10AMP to 200AMP (AC HF TIG mode)
6 Pulse Width   Setting ranges 10%-90%
7 PulseFrequency   Setting ranges 1HZ -200HZ
8   Down Slope   Setting ranges 0.1-10s
9   End current   Setting ranges 10A-100A
10   Post Flow   Setting ranges 1-20S
11   AC Frequency   Setting ranges 50HZ-200HZ
12   Wave Balance   Setting arranges 10%-50%
13   Hot Start   Hot Start Function reliably ignites the electrode and melts perfectly to ensure   the  best  quality even at the start of the seam.
14   ArcforceCorrection   During the welding process, arcforce prevents the electrode sticking in the weld   pool with increases in current.
 
  DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle IIn excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low
Background amperage- can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds
(Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential-which is extremely beneficial to automation wheremaximum travel tspeeds are required.
 
  Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
 
  Arcforce correction (welding characteristics)
 
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
 
  Accessories
For Standard accessories
TIG torch: WP-26
Gas connector: M16
Cable length 3M
5-pin control coupler
Electrode holder
with cable 3M/200A
AG 60-Torch/4.5M Earth clamp with cable 3m Reducing valve
AW2000
For Optional accessories
Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L

TIG torch: DGT 26
Cooling Method: Air-Cooled
Rating: DC 200A AC 125A
Duty Cycle: 35%
Electrode Size: 1.0-4.0


Trolley Foot Pedal
Trolley:
5-pin aviation plug

Welding Type: TIG DC
Shipping weight: 31,00 Kg
Dimensions ( length × width × height ): 54,00 × 27,00 × 45,00 cm

Technical data & functions

Technical specifications

 
  Description VECTOR DIGITAL O251 MULTIFUNCTION
  Weight 31 kg
  Power Source Dimensions L540mmxW270mmxH450mm
  Cooling Fan Cooled
  Welder Type Inverter Power Source
  European Standards EN 60974-1 / IEC 60974-1
  Number of Phases 1
  Nominal Supply Voltage 230V +/- 15%
  Nominal Supply Frequency 50/60Hz
 Welding Current Range ( STICK Mode) 10 - 200A
Welding Current Range ( TIG Mode) 10 - 200A
Welding Current Range (CUT Mode) 10 - 40A
Effective Input Current /STICK /TIG 20.8A
Maximum Input Current/STICK/ TIG 41.6A
Single Phase Generator Requirement 12.1KVA
  STICK (MMA) Welding Output, 40oC, 10 min. 200A @ 25%, 28V
141A @ 50%, 25.6V
110A @ 100%, 24.4V
  TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 25%, 18V
141A @ 50%, 15.6V
110A @ 100%, 14.4V
  Welding Output, 40oC, 10 min. 40A @ 60%, 96V
31A @ 100%, 92.4V
  Open circuit voltage 70.0-80.0V DC
  Protection Class IP23S
 

Scope of delivery

WIG Zubehör WIG-Schweißbrenner "WP-26" 4,5 Meter
4 Gasdüsen. Größen: 4, 5, 6, 7
4 Spannhülsen. Größe 1,6 und 2,4
4 Spannhülsengehäuse. Größe 1,6 und 2,4
Brennerkappe - jeweils eine kurze und eine lange
CUT Zubehör Plasma-Schweißbrenner "AG-60" 4,50 Meter
5 Plasmadüsen AG60
5 Plasmaelektroden AG60
3 Keramikkappen AG60
* 1 Satz Bereits vormontiert auf Plasmabrenner
Sonstiges Wasserabscheider mit Manometer
Gas-Gewebe-Verbindungsschlauch: 3 m
Massekabel 3 Meter
Elektrodenhalter 3 Meter

Accessoires

 

pdf

Warranty conditions

VectorDigital product catalogue

Data sheet

Bedienungsanleitung

Technical Details O251

VECTOR DIGITAL manual

Welding parts

Others

TIG Accessories