VECTOR Digital Welding machine AC/DC TIG V241 Plus Inverter ALU TIG ARC MMA STICK Electrode

Item number: T1013VD

1.699,00 €

including 19% VAT., no shipping costs to: DE , shipping (Standard)

(Net: 1.427,73 €)
Recommended retail price: 1.949,00 €
(You save 12.83%, that is 250,00 €)

Available now!
Our Vector Digital welding machine device for challenging tasks. AC/DC TIG V241 Plus Inverter ALU TIG ARC MMA STICK Electrode DC TIG 200 A, Puls, MMA, . AC, TIG 200 A, TIG Puls, MMA/STICK 200 A, IGBT (Infineon)

Category: TIG Weldingmachines





Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
For These materials:
Input Power: 230V, 1-Phase
Amperage Range: 10-200A
Rated Output at40 C (104 F):
TIG: 200A at 18V @50% Duty Cycle
MMA: 200A at 28V @50% Duty Cycle
Weight: 23KG
For TIG and Stick Welding
  A total solution of precise AC/DC TIG welding machine  
AC/DC V241 is built on the base of the digital system, which offers precise, expert AC/DC TIG welding process. It?s a precise welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs. Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels by pressing the Job and Save button.

Specialist Features
  Precision Arc Performance:  
? DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
? Lift-Arc start provides AC or DC arc starting without the use of high frequency. Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.
? Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
? Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
? Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control, Sine wave for a traditional softer sounding arc,
Triangular wave to reduce the heat input into the weld at low amperage.
Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,
? Pilot Arc for superior arc performance and easy start.
? HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
? Continuous Output Control: focus the arc for different material thickness. Powerful with heavy duty: 200A @50%.
? 10 channels memory capacity
  Outstanding Quality:  
? Newly designed using the latest power electronic technology for improved reliability.
? CE Certified.
  Technical specifications
  Weight 21.9 kg
  Power Source Dimensions H525mmxW260mmxD445mm
  Cooling Fan Cooled
  Welder Type Inverter Power Source
  European Standards EN 60974-1 / IEC 60974-1
  Number of Phases 1
  Nominal Supply Voltage 230V +/- 15%
  Nominal Supply Frequency 50/60Hz
Welding Current Range (DC STICK Mode) 10 - 200A
Welding Current Range (DC TIG Mode) 10 - 200A
Effective Input Current /STICK /TIG 29.5A/18.9A
Maximum Input Current/STICK/ TIG 41.7A/26.8A
Single Phase Generator Requirement 14.4KVA
STICK (MMA) Welding Output, 40oC, 10 min. 200A @ 50%, 28V / 141A @ 100%, 25.6V
TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 50%, 18V / 141A @ 100%, 15.6V
Open circuit voltage 70.0-80.0V DC
Protection Class IP23S
  General View of Control Panel
Control Panel Parameter Values
1. RESET button
2. Pulse Button
3. Trigger Mode Control Button
4. Process Selection Button
5. Digital Ammeter
6. Digital Voltmeter / Parameter meter

7. Power ON Indicator
8. Thermal Overload Indicator Light
9. JOB and SAVE
10. Programming Parameter
11. HF Button
13. Forward Programming Button
12. Mode Button
14. Back Programming Button
15. Positive Control
16. Negative Control
  General View of Contrl Panel(Continued)
Item   Symbol   Description
1   Gas Pre-Flow   Absolute setting range 0.1s to 20s (0.1S increments)
2   Initial Current   The main current Setting range 10-200AMP
3   Up Slope   Setting ranges :0.1S-10S (0.1S increments)
4   Peak Current   Setting ranges
  10-200AMP (DC TIG mode), 10 -200A (AC HF TIG mode),10-200A(STICK mode)
5   Base Current   Setting ranges
  10-200AMP (DC TIG mode), 10-200AMP (AC HF TIG mode)
6   Pulse Width   Setting ranges 10%-90%
7   Pulse
  Setting ranges 1HZ -200HZ
8   Down Slope   Setting ranges 0.1-10s
9   End current   Setting ranges 10A-100A
10   Post Flow   Setting ranges 1-20S
11   AC Frequency   Setting ranges 50HZ-200HZ
12   Wave Balance   Setting arranges 10%-50%
13   Hot Start   Hot Start Function reliably ignites the electrode and melts perfectly to ensure the best   quality even at the start of the seam.
14   Arcforce
  During the welding process, arcforce prevents the electrode sticking in the weld pool
  with increases in current.
  AC Waveshape Controls
AC Frequency control
Controls the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.
AC Balance Control
Controls arc cleaning action.
Adjusting the% EN of the AC wave controls the width of the etching zone surrounding the weld. Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the
weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.
  DC TIG-Pulse
? High Speed DC TIG-Pulse Controls
? PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
? % ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
? Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle In excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential which is extremely
  Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
  Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
For Standard accessories   For Optional accessories
TIG torch: WP-26
Gas connector: M16
Cable length 4M
5-pin control coupler
     Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L
Electrode holder with cable 3M/200A       parker
     TIG torch: WP-26
     Cooling Method: Air-Cooled
     Duty Cycle: 35%
     Electrode Size: 1.0-4.0
Foot Pedal
5-pin aviation plug
Earth clamp with cable 3M      Trolley  

Welding Type: TIG DC
Brand: S-Series
Shipping weight: 30,00 Kg
Product weight: 26,00 Kg
Dimensions ( length × width × height ): 53,00 × 24,00 × 43,00 cm

Technical data & functions





Setting range for welding current




Duty cycle at ambient temperature

40 °C


40 °C


40 °C










Open circuit voltage




Mains Frequency

50 Hz / 60 Hz

50 Hz / 60 Hz

50 Hz / 60 Hz

Mains fuses(slow-blow)

1 X 16A

Mains Voltage(tolerances)

1 x230 V (±15 %)

Max. connected load




Recommended generator power





cos φ






Dimensions machine, LxWxH in mm








Protection classification





IEC 60 974-1

  • TIG welding with reproducible, electronic HF start
  • TIG lift arc welding without HF
  • Adjustable AC frequency between 50 Hz and 200 Hz
  • Non-latched/latched operation
  • Clearly structured operating panel, operating elements streamlined to feature the main TIG functions
  • Up-slope/down-slope adjustable
  • Adjustable gas pre-flows/post-flows
  • Accurate Pulse data with 9 program SAVE
  • Resettable adjustment of all welding function
  • Pilot or normal strike Arc available
  • Multichoice of remote controller
  • MMA welding
  • Antistick function
  • Adjustable hot start current and hot start time
  • Adjustable Arcforce
  • Plasma cutting
  • High mains voltage tolerance +15%to maintain stable work
  • 3M power cable and 16A European adopter

Scope of delivery

WIG Zubehör WIG-Schweißbrenner "WP-26" 4,5 Meter
4 Gasdüsen. Größen: 4, 5, 6, 7
4 Spannhülsen. Größe 1,6 und 2,4
4 Spannhülsengehäuse. Größe 1,6 und 2,4
Brennerkappe - jeweils eine kurze und eine lange
Sonstiges Gas-Gewebe-Verbindungsschlauch: 3 m
Massekabel 3 Meter
Elektrodenhalter 3 Meter


Warranty conditions

VectorDigital product catalogue

Data sheet



Other customers have also bought the following items

Related products