VECTOR Tokyo 2300 Kombi Welder DC TIG 200 Plus TIG MMA E-Hand Inverter 3 in1
Item number: T1050SIWM

VECTOR Tokyo 2300 Kombi Welder DC TIG 200 Plus TIG MMA E-Hand Inverter 3 in1

Item number: T1050SIWM
Available now!
349,95 €

including 16% VAT., no shipping costs to: DE,shipping (Standard)

(Net: 301,68 €)
Recommended retail price: 399,00 €
(You save 12.29%, that is 49,05 €)

VECTOR WELDING Schweißgerät Tokyo 2300

DC WIG 10-200A

Hochfrequenz Zündung

Puls Funktion

MMA/Elektrode 10-170A


Hinweis: Kupplungsventil nicht im Lieferumfang enthalten

Produktdetails anzeigen

Tokyo 2300


Light industrial Application:
Metal fabrication workshops
Shipyards and offshore industry
Metal fabrication workshops
Stick (MMA)
Input Power: 230V, 1-Phase
Amperage Range: TIG/10-200A Stick/10-170A
Rated Output at40 C (104 F):
TIG: 200A at 18V @ 40% Duty Cycle
MMA: 170A at 26.8V @ 30% Duty Cycle
Weight: 6,5 KG
For TIG and Stick Welding
High Performance in a Compact Design.
The Tokyo2300 is a small but rugged, high-performance DC TIG and Stick welder designed for alloy fabrication, process piping, or critical maintenance work. Accurate and refined HF ignition and the necessary control, power and work capacity to reliably complete a variety of professional welding tasks. Weights at a portable 10.9 kg, the machine automatically connects to 115V or 230V (in PFC) service and features simple torch connections that provide for quick changeover from TIG to Stick welding.
Specialist Features
Precision Arc Performance:
Pulse control:
Built in pulsing functions help minimize heat input on thin materials,
and provide for a faster freezing weld puddle for uphill welding on
curved surfaces such as process piping. The TIG pulser also helps
moderate filler metal deposition for consistent bead appearance.
High-frequency TIG starting:
Makes it easy to establish an arc under a variety of conditions.
Enhances quality by minimizing the potential for weld contamination
created by tungsten inclusions in the weld.
Powerful with heavy duty power sources at maximum output current: 200A @60%.
Easy operation and full functions: from the control panel allowing fast adjustment of all necessary controls for DC Pulse TIG welding with
either HF or contact ignition.
Professional Features:
Ideally suited for external operations: The Tokyo2300 light-weight and adjustable shoulder strap enable welding in the outside working field.
Program memory features 9 independent program memories that maintain/save your preferred parameters.
Outstanding Quality:
Newly designed using the latest power electronic technology for improved reliability.
CE Certified.
   2Years Warranty on parts , 5 Years Warranty on Transformer
Technical specifications
Description SIWM DIGITAL Tokyo2300
Weight 6,5 kg
Power Source Dimensions H320mm x W160mm x D380mm
Cooling Fan Cooled
Welder Type Inverter Power Source
European Standards EN 60974-1 / IEC 60974-1
Number of Phases 1
Nominal Supply Voltage 230V +/- 15%
Nominal Supply Frequency 50/60Hz
Welding Current Range (DC STICK Mode) 10 - 170A
Welding Current Range (DC TIG Mode) 10 - 200A
Effective Input Current /STICK /TIG 16.8A
Maximum Input Current/STICK/ TIG 30.97A
Single Phase Generator Requirement 15KVA
STICK (MMA) Welding Output, 40oC, 10 min. 170A @ 30%, 26.8V / 93A @ 100%, 23.7V
TIG (GTAW) Welding Output, 40oC, 10 min. 200A @ 40%, 18V / 126A @ 100%, 15V
Open circuit voltage 74V DC
Protection Class IP23
General View of Control Panel
Control Panel Parameter Values
1. Power ON Indicator/ Fault Indicator
2. Process Selection Button
3. Trigger Mode Control Button (HF TIG and LIFT TIG Mode only)
4. Pulse Button

5. Negative Control / Postive Control
Selecting Function Button
6. Digital Ammeter/Parameter meter
7. Hot Start / Arcforce Correction / Anti-stick
8. JOB and SAVE
General View of Contrl Panel(Continued)
Item Symbol Description
1 Gas Pre-Flow Absolute setting range 0.1s to 20s (0.1S increments)
2 Initial Current The main current Setting range 5AMP to 200AMP
3 Up Slope Setting ranges :0.1S-10S (0.1S increments)
4 Peak Current Setting ranges 5 -200AMP (DC TIG mode), 5-200Amp( STICK mode)
5 Base Current Setting ranges 5-200AMP (DC TIG mode)
6 Pulse Width Setting ranges 10%-90%
7 Pulse
Setting ranges 1HZ -200HZ
8 Down Slope Setting ranges 0.1-10s
9 End current Setting ranges 5A-200A
10 Post Flow Setting ranges 1-20S
DC TIG-Pulse
High Speed DC TIG-Pulse Controls
PPS Pulses per second (Hz): DC=0.1- 5,000 PPS
% ON-% Peak Time: 5-95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
Background Amps: 5-99% (Sets the low-pulse amperage value as a % of the Peak Amps.)
Typically from 1 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and increase overall control of the weld puddle In excess of 40 PPS, Pulsed TIG becomes more audible than visible-causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds- between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds (Common Range: 100-500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new dimensions. The ability to pulse at 5,000 PPS further enhances arc stability and concentration potential which is extremely
Hot Start
Hot Start Function reliably ignites the electrode
and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes
lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement.
Adjust the hot start current here and the time here.
Arcforce correction (welding characteristics)
During the welding process, arcforce prevents
the electrode sticking in the weld pool with
increases in current. this makes it easier to weld
large-drop melting electrode types at low current
strengths with a short arc in particular.
The trigger mode control is used to switch the functionality of the torch trigger between 2T / 4T
2T Normal Mode: In this mode, the torch trigger must remain pressed for the welding output to be active.
Press and hold the torch trigger to activate the power source (weld). Release the torch trigger switch to cease welding.

4T Latch Mode: This mode of welding is mainly used for long welding runs to reduce operator fatigue. In this
mode the operator can press and release the torch trigger and the output will remain active. To deactivate the power source, the trigger switch must again be depressed and realized, thus eliminating the need for the operator to hold the torch trigger.
For Standard accessories
TIG torch: WP-17
Gas connector: M16
Cable length 4M
5-pin control coupler
Electrode holder
with cable 2,5M/200A
Earth clamp with cable 2,5m
For Optional accessories
Argon gas regular Water-cooling unit: wc-100
Operating Voltage:230V 50/60Hz
Rated Power:260W
Cooling Power:1.5KW(1L/MIN)
Tank Volume:6.5L
Foot Pedal
5-pin aviation plug

TIG torch: DGT 26
Cooling Method: Air-Cooled
Rating: DC 180A AC 125A
Duty Cycle: 35%
Electrode Size: 1.0-4.0


Einstellbereich Schweißstrom (WIG  Modus)
10 -200 A
Einstellbereich Schweißstrom (MMA/STICK Modus)
10 -170 A
Einschaltdauer (ED) WIG 40°C
200 A bei 18 V 40%
Einschaltdauer (ED) MMA/STICK 40°C
170 A bei 26,8 V 40%
1 x 230 Volt
50 - 60 Hz
Maße in mm (L x B x H)
320 x 160 x 380
Gewicht in kg
EN60974-1 / IEC60974-1

Tokyo 2300 Lieferumfang:

DC WIG Schweißgerät Tokyo 2300
WIG-Brenner: WP-17 (9 Dorn, 5 pol), 4m
WIG- Set, 14-teilig
Elektrodenzange (9 Dorn), 3m
Massezange mit Massekabel (9 Dorn), 3m

Manual Tokyo 2300

English Manual Tokyo 2300

Other customers have also bought the following items